NTECHNIKS flap control for Kia Proceed GT

Our advanced flap control allows you to control the exhaust flaps of your Kia Proceed GT manually using a hand-held transmitter – for individual adjustment of the sound according to your wishes.

Function:
As standard, the exhaust flap of the exhaust system is automatically controlled depending on the driving mode, speed and accelerator pedal position. With our flap control, you can determine the sound of your Kia Proceed GT yourself at the touch of a button and open the exhaust flap 100% in every mode - regardless of the speed or driving mode. Pressing a button again restores the standard control . The control remains in standard mode when the engine is started and automatically returns to the factory state after 2-3 minutes as soon as the vehicle is switched off.

Characteristics:
• More power and torque due to reduced back pressure when the flap is open ( demonstrable by input and output measurement )
• Significantly louder banging in sport mode
• More intense bubbling in Eco and Normal mode

Advantages compared to cheaper competitor products:
• No interference with the CAN bus system – the installation of the control cannot be detected , no error codes are written, other control units remain unaffected and software updates have no influence on the function.
• Original look – The simple, compact design means there is no conspicuous additional box .
• Plug-and-play installation with original plugs – simply plugged between the original plugs , no damage to the original cables .
• Highest weather resistance – double-sealed connectors and sealed electrical components provide reliable protection against moisture .
• True series mode – The module remains deactivated even after the vehicle starts .
• No additional box with cables – Compact, integrated system without unnecessary additional components.

Assembly:
Installation is based on the plug-and-play principle and takes less than 5 minutes . Thanks to vehicle-specific plug connections, the flap control can be mounted directly on the exhaust flaps .
The control is simply plugged in between the original connection cable and the exhaust flap . Make sure that the protective pipe does not come into contact with the exhaust pipe , as the heat generated at the tailpipe can damage the wiring harnesses .

Radio remote control:
• Three different remote controls to choose from
• Long range for reliable control
• High-quality workmanship for maximum durability

Note: This product does not meet the approval criteria of the Road Traffic Licensing Regulations (StVZO) and is intended exclusively for use in racing, for show purposes or for export. Use or installation on public roads is not permitted. Installation of this component on or in the vehicle will invalidate the operating license. Use and installation are at your own risk. No liability is accepted for consequential damage to the vehicle.

All brands, model names and manufacturers mentioned in this shop such as AUDI, BMW, Hyundai, Kia, Toyota, VW, Tesla are used solely to describe the compatibility of our products . They have no connection with the respective brand owners and, unless expressly stated, they are not original parts from these manufacturers.

FLOW DOWN® is an independent supplier of tuning and accessories. The use of the brand names mentioned is for guidance only and does not constitute a collaboration, licensing or approval by the respective rights holders . All trademark and name rights are held by their respective owners.

Manufacturer: FLOW DOWN
Hermann-Drescher-Weg 6E
45329 Essen, Germany
support@flow-down.com
https://flow-down.com/