NTECHNIKS flap control for Hyundai I20N

Our extended flap control allows you to control the exhaust flaps of your Hyundai I20N Manually controllable via handheld transmitter – for individual sound adjustment according to your wishes.

Function:
The exhaust flap of the exhaust system is automatically controlled as standard, depending on the driving mode, speed, and accelerator pedal position. With our Flap control Can you adjust the sound of your Hyundai I20N by key press determine yourself and the exhaust flap in every mode Open 100% – regardless of engine speed or driving mode. Another press of the button sets the standard control back again. The control remains at Engine start in standard mode and returns to 2–3 minutes automatically returns to factory settings as soon as the vehicle is switched off.

Characteristics:
• More power and torque through reduced back pressure when the flap is open (verifiable through input and output measurements)
• Significantly louder bangs in the N-mode
• More intense bubbling in the Eco, Normal & Sport modes

Advantages compared to cheaper competitor products:
• No interference with the CAN bus system – The installation of the control unit is not detectable, it will no error codes written, other control units remain unaffected, and Software updates have no effect. on the function.
• Original look – Through the simple, compact design there is no conspicuous additional box.
• Plug-and-play installation with original connectors – It will simply inserted between the original connectors, No damage to the original cables.
• Maximum weather resistance – Double-sealed connectors and sealed electrical components reliably protects against moisture.
• True serial mode – The module will also remain deactivated after vehicle start.
• No additional box with cables required. – Compact, integrated system without unnecessary additional components.

Assembly:
The Installation is performed according to the plug-and-play principle. and lasts less than 5 minutes. Thanks to vehicle-specific connectors can the Flap control directly on the exhaust flaps to be installed.
The The control unit is simply plugged in between the original connection cable and the exhaust flap.Make sure that the The protective tube should not contact the exhaust pipe. has, since the Heat build-up at the tailpipe can damage cable harnesses.

Wireless remote control:
• Three different remote controls to select
• Long range for reliable control
• High-quality workmanship for maximum durability

A notice: This product does not meet the approval criteria of the German Road Traffic Licensing Regulations (StVZO) and is intended exclusively for use in racing, for show purposes, or for export. Use or installation on public roads is prohibited. Installing this component on or in a vehicle will invalidate its operating permit. Use and installation are at your own risk. No liability is assumed for consequential damage to the vehicle.

Q&A: How do I change the batteries in the remote control for the flap control?

Important: It must 2× CR2016 must be used – otherwise the remote control will not work.

Plastic remote control (black/white):
At the front edge, use a small screwdriver. pry open → open → 2× CR2016 change (Pay attention to polarity) → clip it shut.

Remote control with metal rim:
Rear Loosen 3 screws → open → 2× CR2016 change (Pay attention to polarity) → close → tighten screws.

Do you want to know how the part is assembled?
Here you can find all our video tutorials in one place.

Alle in diesem Shop genannten Marken, Modellbezeichnungen und Hersteller wie AUDI, BMW, Hyundai, Kia, Toyota, VW, Tesla dienen ausschließlich der Beschreibung der Kompatibilität unserer Produkte. Sie stehen in keiner Verbindung zu den jeweiligen Markeninhabern, und sofern nicht ausdrücklich angegeben, handelt es sich nicht um Originalteile dieser Hersteller.

FLOW DOWN® ist ein unabhängiger Anbieter von Tuning- und Zubehörteilen. Die Verwendung der genannten Markennamen erfolgt lediglich zur Orientierung und stellt keine Zusammenarbeit, Lizenzierung oder Genehmigung durch die jeweiligen Rechteinhaber dar. Sämtliche Marken- und Namensrechte liegen bei den jeweiligen Eigentümern.

Manufacturer: FLOW DOWN
Hermann-Drescher-Weg 6E
45329 Essen, Germany
info@flow-down.com (No Support)
https://flow-down.com/