KW coilover suspension V3 Inox (with compression & rebound damping) Hyundai i30 N Performance (2017-2020)

KW coilover suspension V3 Inox (with compression & rebound damping) Hyundai i30 N Performance (2017-2020)

• Lowering front/rear: 20-40 mm/20-40 mm
• Axle load front/rear: up to 1090 kg/up to 1010 kg
• Year of construction: 2017-2020 (i30 N Performance pre-facelift)
• Hardness adjustability: yes
• Report: parts report

• VA + RA height adjustable (VA threaded spring struts, RA springs with height adjustment + dampers)
• In vehicles with electronic damper control, this must be shut down. Electronics set for decommissioning is included in delivery.
• Dampers have easy-to-use adjustment wheels. Due to the design, the rebound stage only works when the piston rod is accessible.

KW V3 coilover suspension – pure performance!

The KW V3 coilover suspension, formerly variant 3, impresses with its focus on sportiness. It is perfect for the driver who values ​​performance. Here’s to diving deep into the curve. Another extra: The chassis technology from KW Suspensions impresses with the maximum possible lowering. Make the most of it! With the Variant 3 chassis you can get as low as is technically possible. Is that too much in everyday life? Don't worry, thanks to the individual adjustability, the lowering can be adjusted in no time. It's not for nothing that the KW coilover kit variant 3 is the bestseller from KW!

KW V3 coilover suspension advantages:

- It's not for nothing that we're bestsellers from KW. It combines only the best! Maximum performance meets maximum lowering!
- The dampers can be adjusted separately in the rebound and compression stages
- Optimally adjusted damper setup at the factory that is perfectly tailored to the respective vehicle
- Tracking stability, tire grip and steering behavior can be controlled as best as possible by the chassis
- Improved handling at the limit
- Despite the good road holding, there is still enough remaining comfort

KW V3 coilover suspension characteristics

- The higher the number after the V at KW, the more technology behind it!
- Composite spring plate for particularly long durability individual, stepless lowering with height-adjustable spring legs.
- A surge tank provides additional volume for oil and cooling surface. This is important for chassis that have to withstand special loads
- TVR-A rebound damping meets TVR-A compression damping . Both ensure that driving comfort is optimally guaranteed, even in the safety-relevant high-speed range
- The chassis has a two-stage rebound valve including adjustable rebound damping
- Trapezoidal thread and spring legs made of first-class stainless steel guarantee long durability
- Comes including parts report that indicates the respective lowering of the vehicle
- The in-house 7-post vehicle dynamics test bench from KW has it all. Here the chassis is thoroughly tested and perfectly tailored to the respective vehicle!
- The chassis has a two-stage compression valve including low-speed adjustment. This makes it possible to support the body better and at the same time achieve more comfort when the tires accelerate at high speeds than is possible with conventional valve technology.

Professional installation directly at our location in Essen.

Please feel free to arrange a consultation and installation appointment easily via our chat