Grail 3.5 inch exhaust system suitable for VW Golf 7 R Facelift – valve system

The facelift update for the last 7 Series R

The Golf 7 R facelift (model years 2017–2020) marks the end of a generation that many tuning enthusiasts still consider the best R series. 310 hp, all-wheel drive, DSG transmission – and with the GRAIL 3.5" flap exhaust system, finally the sound that truly lives up to the R character. What VW acoustically holds back, GRAIL unleashes uncompromisingly: voluminous 2.0 TSI power in Sport mode, subtle in cruising, and crisp backfires during load changes.

LMade of 304 stainless steel, handcrafted in Germany, with ECE type approval – meaning it's registration-free for all EU vehicles. The 3.5-inch diameter offers room for stage upgrades and software optimization without pushing the system to its limits.

Flap control – factory-installed

The Golf 7 R facelift comes standard with its own exhaust flap control – the GRAIL system takes over this completely. You continue driving your R with the familiar driving modes and without any changes to the interior:

• In Race or Sport mode, the flaps open fully – full GRAIL sound.
• In Comfort or Eco mode, they remain closed – discreet and ECE-compliant.

No remote control, no additional module, no modification to the wiring harness. Plug-and-play connection to the OEM exhaust flap control of your Golf 7 R Facelift.

Configuration in the configurator

Before ordering, you select the following factors:

• Downpipe connection: On a standard or HJS downpipe
• Tailpipe variant: 5 different designs (see below)

Unsure which configuration fits your Golf 7 R Facelift? Send us the VIN via WhatsApp or contact form – we'll check it for you.

Downpipe connection – stock or HJS

• A series: Standard choice for Golf 7 R Facelift with factory downpipe. The GRAIL is connected directly to the OEM downpipe.
• To HJS: For drivers with an installed HJS downpipe (typical for Stage 2 / Stage 3 setups). The GRAIL is manufactured with a compatible interface for HJS.

Tailpipes – 5 designs to choose from

When it comes to the rear end, you have a full range of options for the Golf 7 R facelift. Each variant adds a different touch:

• Double oval (165 × 100 mm) – stainless steel: Classic sporty design, two wide oval tailpipes in OEM-Plus look
• Double oval (165 × 100 mm) – Black: A subtle appearance, especially harmonious with the black package.
• 4-flow round (100 mm) – stainless steel: Four round tailpipes – maximum presence at the rear
• 4-flow round (100 mm) – Black: Four round tailpipes in matte black – aggressive and eye-catching.
• 4-flow round (100 mm) – Carbon: Four round tailpipes with genuine carbon fiber covering – premium look

Material & Construction

LMade entirely of 304 stainless steel, with CNC-precision machined components. The silencers were specially tuned in the GRAIL sound lab for the 2.0 TSI engine of the Golf 7 R facelift. Flow-optimized pipe routing minimizes exhaust backpressure. The carbon fiber tailpipe version uses high-quality, genuine carbon fiber sleeves – not imitations.

Highlights

• Specifically designed for VW Golf 7 R Facelift (model years 2017–2020)
• ECE type approval – registration-free within the EU
• GRAIL adopts factory VW flap control
• 5 tailpipe options to choose from
• 3.5 inches L304 stainless steel, handcrafted in Germany

Order with installation from FLOW DOWN®

FLOW DOWN® is an official GRAIL partner in the Ruhr area. When you order with installation, you'll receive our fair deposit payment model:

• 50% deposit upon order placement – we will then order the system from GRAIL
• As soon as the system arrives at our workshop, we will arrange an installation date with you.
• You only pay the remaining amount after the installation has been completed – not before.

Important: The deposit payment option applies exclusively to bookings including installation and is only available via prepayment/bank transfer. PayPal or other payment methods are not accepted for this service.

Swiss suitability assessment

Upon request, you can receive a Swiss suitability assessment for the GRAIL system for an additional fee. If interested, simply contact support.

Suitable vehicles

• VW Golf 7 R Facelift – Bj. 2017–2020
• VW Golf 7 R Variant Facelift

Not suitable for: Golf 7 R pre-facelift (CJXC engine, separate system available in our shop), Golf 7 GTI (completely different engine code and exhaust system). Separate GRAIL systems are available for these models.

scope of delivery

• GRAIL 3.5 inch flap exhaust system suitable for VW Golf 7 R Facelift (in your chosen configuration)
• Tailpipe variant according to selection (2-flow oval or 4-flow round in stainless steel, black or carbon)
• mounting material
• ECE type approval as proof for the vehicle

Information on admission

Registration-free thanks to ECE type approval – applies to all EU vehicles with standard registration. For imported vehicles with a different operating permit, please check registration requirements before ordering. The ECE type approval certificate should be kept in the vehicle's glove compartment.

Alle in diesem Shop genannten Marken, Modellbezeichnungen und Hersteller wie AUDI, BMW, Hyundai, Kia, Toyota, VW, Tesla dienen ausschließlich der Beschreibung der Kompatibilität unserer Produkte. Sie stehen in keiner Verbindung zu den jeweiligen Markeninhabern, und sofern nicht ausdrücklich angegeben, handelt es sich nicht um Originalteile dieser Hersteller.

FLOW DOWN® ist ein unabhängiger Anbieter von Tuning- und Zubehörteilen. Die Verwendung der genannten Markennamen erfolgt lediglich zur Orientierung und stellt keine Zusammenarbeit, Lizenzierung oder Genehmigung durch die jeweiligen Rechteinhaber dar. Sämtliche Marken- und Namensrechte liegen bei den jeweiligen Eigentümern.