{"title":"EXTERIOR TUNING PARTS SUITABLE FOR BMW  M3 TOURING (G81)","description":"\u003cp\u003e\u003cstrong\u003eDISCOVER EXTERIOR PARTS SUITABLE FOR YOUR BMW M3 TOURING (G81)\u003cbr\u003e\u003c\/strong\u003eFrom number plate holders and sunstrips to underbody lighting, tint film, carbon parts and tailpipes.\u003c\/p\u003e","products":[{"product_id":"magnet-kennzeichenhalter-passend-fur-bmw-m3-g80-g81-m4-g82-g83","title":"Magnetic number plate holder suitable for BMW M3 G80 \/ G81 \/ M4 G82 \/ G83","description":"\u003ch1\u003eMagnetic license plate holder suitable for BMW M3 G80 \/ G81 \/ M4 G82 \/ G83\u003c\/h1\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe FLOW DOWN® magnetic license plate holder suitable for the BMW M3 G80 Sedan, M3 Touring G81, M4 G82 Coupe, and M4 G83 Convertible replaces the original screw mount with a clean magnetic system. The distinctive M kidney grille and aggressive front design of the G80 \/ G82 models are much better showcased without a bulky holder – the license plate can be removed in seconds for photoshoots, track days, or car meets.\u003c\/p\u003e\n\u003cp\u003eHigh-performance neodymium magnets, tested up to 300 km\/h and proven in practical tests on the Nürburgring Nordschleife with racing driver Loris Scheider. Magnets and manufacturing made in Germany.\u003c\/p\u003e\n\u003ch2\u003eHighlights\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePrecisely fitting for M3 G80, M3 Touring G81, M4 G82, and M4 G83\u003c\/li\u003e\n\u003cli\u003eMade in Germany – magnets and manufacturing\u003c\/li\u003e\n\u003cli\u003eTested up to 300 km\/h, practical test on the Nordschleife\u003c\/li\u003e\n\u003cli\u003eLicense plate can be attached and removed in seconds\u003c\/li\u003e\n\u003cli\u003eSuitable for metal and 3D license plates\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eMaterial\u003c\/h2\u003e\n\u003cp\u003eHigh-performance neodymium magnets in a robust plastic housing. Weather-resistant and matched to the bumper contour of the M3 \/ M4 G series.\u003c\/p\u003e\n\u003ch2\u003eUsage\u003c\/h2\u003e\n\u003cp\u003eScrew the magnets onto the bumper, stick the magnet plates to the license plate – done. Simply place the license plate on and remove it again if needed.\u003c\/p\u003e\n\u003cp\u003eOptional installation is also possible at FLOW DOWN® in Essen.\u003c\/p\u003e\n\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBMW M3 G80 Sedan – from model year 2020\u003c\/li\u003e\n\u003cli\u003eBMW M3 Competition G80\u003c\/li\u003e\n\u003cli\u003eBMW M3 CS G80\u003c\/li\u003e\n\u003cli\u003eBMW M3 Touring G81 – from model year 2022\u003c\/li\u003e\n\u003cli\u003eBMW M4 G82 Coupe – from model year 2020\u003c\/li\u003e\n\u003cli\u003eBMW M4 Competition G82\u003c\/li\u003e\n\u003cli\u003eBMW M4 CSL G82\u003c\/li\u003e\n\u003cli\u003eBMW M4 G83 Convertible – from model year 2021\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSuitable for the following license plates\u003c\/h2\u003e\n\u003cp\u003eSuitable for German metal license plates and 3D license plates. Also fits all common EU license plates (including Austria, Switzerland, Netherlands, Belgium, France, Italy, Spain, Poland) as well as license plates from the UK, USA, and Canada.\u003c\/p\u003e\n\u003ch2\u003eScope of delivery\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2x magnets for the vehicle (for 1 license plate)\u003c\/li\u003e\n\u003cli\u003e2x magnetic plates for the license plate (with pre-mounted 3M adhesive tape)\u003c\/li\u003e\n\u003cli\u003e2x screws\u003c\/li\u003e\n\u003cli\u003eStickers to cover the screw heads\u003c\/li\u003e\n\u003cli\u003eTechnical product data sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNote: One set contains holders for one license plate. Two sets are required for front and rear.\u003c\/p\u003e\n\u003ch2\u003eNotes on approval\u003c\/h2\u003e\n\u003cp\u003eThe magnetic license plate holder is registration-free. Material and practical tests are documented, and compliance with §12 FZV when used properly is recorded in the enclosed technical product data sheet.\u003c\/p\u003e","brand":"FLOW DOWN®","offers":[{"title":"Front","offer_id":45549614399752,"sku":"FDE004","price":34.0,"currency_code":"EUR","in_stock":true},{"title":"Rear","offer_id":45549614432520,"sku":"FDE005-04","price":34.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/FLOWDOWN_BMW_M3_M4_G8X_MAGNET_KENNZEICHENHALTER_01.jpg?v=1727186349"},{"product_id":"carbon-spiegelkappen-fur-m3-g80-m4-g82","title":"Carbon mirror caps in pre-preg carbon suitable for BMW M2\/M3\/M4 (G80\/G81\/G82\/G87)","description":"\u003ch4 style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eFull carbon mirror caps for BMW M2\/M3\/M4 (G80\/G81\/G82\/G87)\u003c\/h4\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe carbon mirror caps add that certain something. Even though it is just a small detail, the carbon fiber mirror caps stand out immediately and provide pure individuality.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCarbon\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e-\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003ci data-mce-fragment=\"1\"\u003eexclusive, sporty, and aesthetic.\u003c\/i\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eThese are just a few characteristics associated with this material. Especially in the automotive sector, this material is highly regarded for its technical properties and appearance.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSince these are complete replacement caps, a perfect fit is guaranteed. No crafting or gluing is necessary.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThanks to the original mounting points, a quick and professional\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003einstallation is ensured. \u003c\/p\u003e\n\u003ch6 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eScope of delivery:\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSet (2 pieces left and right) mirror caps\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003efree from registration or approval \u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FLOW DOWN®","offers":[{"title":"Classic carbon","offer_id":45556815331592,"sku":"FDE009","price":549.0,"currency_code":"EUR","in_stock":true},{"title":"Forged Carbon","offer_id":45556815364360,"sku":"FDE009-02","price":599.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/FLOWDOWN_CARBON_SPIEGELKAPPEN_G8X_1.jpg?v=1749419842"},{"product_id":"voll-carbon-motor-cooling-plate-fur-bmw-m2-g87","title":"Oil cooler plate in pre-preg carbon suitable for BMW M2\/M3\/M4 (G80\/G81\/G82\/G83\/G87)","description":"\u003cp\u003e\u003c\/p\u003e\n\n\u003ch4 style=\"text-align: center;\"\u003e\n\n \u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eOil cooler plate made of PrePreg Carbon\u003c\/span\u003e\u003cbr\u003e\n\n\u003c\/h4\u003e\n\n \u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eScope of delivery:\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003cspan data-mce-fragment=\"1\"\u003e-Full carbon oil cooler plate\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n\u003cp\u003e \u003cspan data-mce-fragment=\"1\"\u003eThis is\u003c\/span\u003e \u003cstrong data-mce-fragment=\"1\"\u003enot an\u003c\/strong\u003e \u003cspan data-mce-fragment=\"1\"\u003eoriginal BMW product.\u003c\/span\u003e\u003c\/p\u003e","brand":"FLOW DOWN®","offers":[{"title":"Default Title","offer_id":45556610564360,"sku":"FDE047","price":499.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/FLOWDOWN_OeLKuehlerPlatteausPrePregCarbonfuerBMWM2_M3_M4_G80_G81_G82_G83_G87_1.jpg?v=1750601925"},{"product_id":"lufteinlasse-aus-prepreg-carbon-fur-bmw-m3-m4-g80-g81-g82-g83","title":"Air intakes in pre-preg carbon suitable for BMW M3\/M4 (G80\/G81\/G82\/G83)","description":"\u003cp\u003e \u003c\/p\u003e\n\u003ch4 style=\"text-align: center;\"\u003e\u003cspan style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003eFull carbon air intakes for BMW M3\/M4 (G80\/G81\/G82\/G83)\u003c\/span\u003e\u003c\/h4\u003e\n\u003ch4 style=\"text-align: center;\"\u003e\u003cbr\u003e\u003c\/h4\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eScope of delivery:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e-Full carbon air intakes L+R\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eThis is about \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003eno\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e Original BMW product.\u003c\/span\u003e\u003c\/p\u003e","brand":"FLOW DOWN®","offers":[{"title":"Default Title","offer_id":45556614922504,"sku":"FDE058","price":699.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/8197351F-F752-4397-8CBF-2AA2D683E2CA.png?v=1749421041"},{"product_id":"frontgrill-v-3-aus-prepreg-carbon-fur-bmw-m3-m4-csl-g80-g81-g82-g83","title":"Front grille V.3 in pre-preg carbon suitable for BMW M3\/M4-CSL (G80\/G81\/G82\/G83)","description":"\u003cp\u003e \u003c\/p\u003e\n\u003ch4 style=\"text-align: center;\"\u003eCarbon front grille for BMW M3\/M4 (G80\/G81\/G82\/G83)\u003c\/h4\u003e\n\u003cp\u003eBeautify the front of your BMW with the front grill made of pre-preg carbon fiber and give your M a new sporty style.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur carbon is manufactured using a modern autoclave process, resulting in a lighter yet durable material. \u003cbr\u003eA vacuum process ensures clean processing of carbon fiber, free of defects such as air pockets or resin. This prevents the typical deformation and yellowing of carbon.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003cstrong data-mce-fragment=\"1\"\u003e\u003cu data-mce-fragment=\"1\"\u003eScope of delivery:\u003c\/u\u003e\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e1x front grille\u003cbr\u003e1x mounting material\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cu data-mce-fragment=\"1\"\u003eSuitable for:\u003c\/u\u003e\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBMW M3 G80\/G81\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBMW M4 G82\/G83\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis is about \u003cstrong data-mce-fragment=\"1\"\u003eno\u003c\/strong\u003e Original BMW product.\u003c\/p\u003e","brand":"FLOW DOWN®","offers":[{"title":"With ACC","offer_id":45556992213256,"sku":"FDE021","price":1099.0,"currency_code":"EUR","in_stock":true},{"title":"Without ACC","offer_id":45556992246024,"sku":"FDE021-02","price":1099.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/FD-CSL-1.jpg?v=1749421133"},{"product_id":"frontgrill-v-2-aus-prepreg-carbon-fur-bmw-m3-m4-g80-g81-g82-g83","title":"Front grille V.2 in pre-preg carbon suitable for BMW M3\/M4 (G80\/G81\/G82\/G83)","description":"\u003ch4 style=\"text-align: center;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eFull carbon front grille for BMW M3\/M4 (G80\/G81\/G82\/G83)\u003c\/span\u003e\u003c\/h4\u003e\n\u003cp\u003eBeautify the front of your BMW with the front grill made of pre-preg carbon fiber and give your M a new sporty style.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur carbon is manufactured using a modern autoclave process, resulting in a lighter yet durable material. \u003cbr\u003eA vacuum process ensures clean processing of carbon fiber, free of defects such as air pockets or resin. This prevents the typical deformation and yellowing of carbon.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003cstrong data-mce-fragment=\"1\"\u003e\u003cu data-mce-fragment=\"1\"\u003eScope of delivery:\u003c\/u\u003e\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e1x front grille L+R\u003cbr\u003e1x mounting material\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cu data-mce-fragment=\"1\"\u003eSuitable for:\u003c\/u\u003e\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBMW M3 G80\/G81\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBMW M4 G82\/G83\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis is about \u003cstrong data-mce-fragment=\"1\"\u003eno\u003c\/strong\u003e Original BMW product.\u003c\/p\u003e","brand":"FLOW DOWN®","offers":[{"title":"Default Title","offer_id":45556992639240,"sku":"FDE020","price":1099.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/FD-V-Style1.jpg?v=1749421206"},{"product_id":"voll-carbon-diffusor-fur-bmw-m3-g80-m4-g82","title":"Pre-preg carbon diffuser suitable for BMW M3\/M4 (G80\/G81\/G82\/G83)","description":"\u003cmeta charset=\"utf-8\"\u003e\n\n\u003ch4 style=\"text-align: center;\"\u003ecarbon diffuser\u003c\/h4\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e \u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cu data-mce-fragment=\"1\"\u003eScope of delivery:\u003c\/u\u003e\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e 1x Carbon diffuser center section\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e \u003cspan data-mce-fragment=\"1\"\u003eFastening with original clips and holes\u003c\/span\u003e\u003c\/p\u003e\n\n \u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSuitable for:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e \u003cspan data-mce-fragment=\"1\"\u003e-BMW M3 G80\/G81\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e \u003cspan data-mce-fragment=\"1\"\u003e-BMW M4 G82\/G83\u003c\/span\u003e\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e \u003cspan data-mce-fragment=\"1\"\u003eThis is \u003cstrong data-mce-fragment=\"1\"\u003enot an\u003c\/strong\u003e original BMW product.\u003c\/span\u003e\u003c\/p\u003e","brand":"FLOW DOWN®","offers":[{"title":"Default Title","offer_id":45556994081032,"sku":"FDE059","price":649.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/FLOWDOWN_PrePregCarbonDiffusorfuerBMWM3_M4_G80_G81_G82_G83_1.jpg?v=1750602726"},{"product_id":"frontgrill-v-1-aus-prepreg-carbon-fur-bmw-m3-m4-g80-g81-g82-g83","title":"Front grille V.1 in pre-preg carbon suitable for BMW M3\/M4 (G80\/G81\/G82\/G83)","description":"\u003ch4 style=\"text-align: center;\"\u003e Carbon front grille for BMW M3\/M4 (G80\/G81\/G82\/G83)\u003c\/h4\u003e\n\n\u003cp\u003e Beautify the front of your BMW with the front grille made of pre-preg carbon fiber and give your M a new sporty style.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\n\u003cp\u003e Our carbon is manufactured using a modern autoclave process, resulting in a lighter yet durable material.\u003cbr\u003e A vacuum process ensures clean processing of carbon fiber that is free of defects such as air pockets or resin. This prevents the typical deformation and yellowing of the carbon.\u003c\/p\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e \u003cstrong data-mce-fragment=\"1\"\u003e\u003cu data-mce-fragment=\"1\"\u003eScope of delivery:\u003c\/u\u003e\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e 1x front grill L+R \u003cbr\u003e1x mounting material\u003c\/p\u003e\n\n\u003cp\u003e\u003cbr\u003e \u003cstrong data-mce-fragment=\"1\"\u003e\u003cu data-mce-fragment=\"1\"\u003eSuitable for:\u003c\/u\u003e\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\n\u003cul data-mce-fragment=\"1\"\u003e\n\n\u003cli data-mce-fragment=\"1\"\u003eBMW M3 G80\/G81\u003c\/li\u003e\n\n\u003cli data-mce-fragment=\"1\"\u003e BMW M4 G82\/G83\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e This is \u003cstrong data-mce-fragment=\"1\"\u003enot an\u003c\/strong\u003e original BMW product.\u003c\/p\u003e","brand":"FLOW DOWN®","offers":[{"title":"With ACC","offer_id":45556994408712,"sku":"FDE022","price":1099.0,"currency_code":"EUR","in_stock":true},{"title":"Without ACC","offer_id":45556994441480,"sku":"FDE022-02","price":1099.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/FrontgrillausPrePregCarbonfuerBMWM3_M4_G80_G81_G82_G83_1.jpg?v=1750599210"},{"product_id":"carbon-motorabdeckung-fur-bmw-m2-m3-m4-g80-g81-g82-g87","title":"Carbon engine cover suitable for BMW M2\/M3\/M4 (G80\/G81\/G82\/G87)","description":"\u003cdiv style=\"text-align: center;\" data-mce-style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e \u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan class=\"def\" data-mce-fragment=\"1\"\u003eCarbon engine cover for BMW M2\/M3\/M4 (G80\/G81\/G82\/G87)\u003c\/span\u003e\u003c\/strong\u003e \u003c\/div\u003e\n\n\u003cdiv style=\"text-align: center;\" data-mce-style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\n\n\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan class=\"def\" data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/strong\u003e \u003cbr\u003e\n\n\u003c\/div\u003e\n\n\u003cdiv style=\"text-align: center;\" data-mce-style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003c\/strong\u003e\u003c\/div\u003e\n\n \u003cdiv style=\"text-align: center;\" data-mce-style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eCarbon fiber materials are characterized by high durability and low weight. Carbon is very often used in motorsports, especially in vehicle aerodynamics. Various types of spoilers, diffusers, splitters and flaps are often made from carbon. \u003c\/div\u003e\n\n\u003cdiv style=\"text-align: center;\" data-mce-style=\"text-align: center;\" data-mce-fragment=\"1\"\u003e\u003c\/div\u003e","brand":"FLOW DOWN®","offers":[{"title":"Classic carbon","offer_id":45610708369672,"sku":"FDE060","price":649.0,"currency_code":"EUR","in_stock":true},{"title":"Forged carbon","offer_id":45610708402440,"sku":"FDE060-02","price":799.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/Motorabdeckung_S58.jpg?v=1749421525"},{"product_id":"carbon-seitenembleme-aus-prepreg-carbon-fur-bmw-m3-m4-g80-g81-g82-g83","title":"Replacement carbon side emblems in pre-preg carbon suitable for BMW M3\/M4 (G80\/G81\/G82\/G83)","description":"\u003ch4 style=\"text-align: center;\"\u003e Carbon side emblems made of PrePreg Carbon\u003c\/h4\u003e\n\n\u003cp\u003e Beautify the badges of your BMW with the carbon emblems and give your M a new sporty style.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong data-mce-fragment=\"1\"\u003e\u003cu data-mce-fragment=\"1\"\u003eScope of delivery:\u003c\/u\u003e\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e 1x Emblem Left\u003cbr\u003e 1x emblem\u003cspan\u003e \u003c\/span\u003eRight\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong data-mce-fragment=\"1\"\u003e\u003cu data-mce-fragment=\"1\"\u003eSuitable for:\u003c\/u\u003e\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\n\u003cul data-mce-fragment=\"1\"\u003e\n\n \u003cli data-mce-fragment=\"1\"\u003eBMW M3 G80\/G81\u003c\/li\u003e\n\n\u003cli data-mce-fragment=\"1\"\u003e BMW M4 G82\/G83\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e This is \u003cstrong data-mce-fragment=\"1\"\u003enot an\u003c\/strong\u003e original BMW product.\u003c\/p\u003e","brand":"FLOW DOWN®","offers":[{"title":"Default Title","offer_id":45699812425992,"sku":"FDE014","price":349.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/Carbon_Embleme_Austausch_G82.jpg?v=1749421804"},{"product_id":"carbon-seitenembleme-aus-prepreg-carbon-fur-bmw-m3-m4-g80-g81-g82-g83-1","title":"Carbon side emblems in pre-preg carbon suitable for BMW M3 (G80\/G81)","description":"\u003ch4 style=\"text-align: center;\"\u003e Carbon side emblems made of PrePreg Carbon\u003c\/h4\u003e\n\n\u003cp\u003e Beautify the badges of your BMW with the carbon emblems and give your M a new sporty style.\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong data-mce-fragment=\"1\"\u003e\u003cu data-mce-fragment=\"1\"\u003eScope of delivery:\u003c\/u\u003e\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e 1x Emblem Left\u003cbr\u003e 1x emblem\u003cspan\u003e \u003c\/span\u003eRight\u003c\/p\u003e\n\n\u003cp\u003e \u003cstrong data-mce-fragment=\"1\"\u003e\u003cu data-mce-fragment=\"1\"\u003eSuitable for:\u003c\/u\u003e\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\n\u003cul data-mce-fragment=\"1\"\u003e\n\n\u003cli data-mce-fragment=\"1\"\u003eBMW M3 G80\/G81\u003cbr\u003e\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp data-mce-fragment=\"1\"\u003e This is \u003cstrong data-mce-fragment=\"1\"\u003enot an\u003c\/strong\u003e original BMW product.\u003c\/p\u003e","brand":"FLOW DOWN®","offers":[{"title":"Default Title","offer_id":45699812557064,"sku":"FDE012","price":249.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/Embleme_v.1.jpg?v=1749421812"},{"product_id":"flow-down®-seitendekoraufkleber-set-2-stuck","title":"FLOW DOWN® side decal set (2 pieces)","description":"\u003ch1\u003eFLOW DOWN® Side Decor Stickers - Set (2 pieces)\u003c\/h1\u003e\n\u003cp\u003eGive your vehicle a unique look with our high-quality FLOW DOWN® side decals. Perfect for tuning enthusiasts and anyone who wants to personalize their car.\u003c\/p\u003e\n\u003ch2\u003eWho is this side panel design perfect for?\u003c\/h2\u003e\n\u003cp\u003eDo you find your car's design boring and want to enhance it, but a full wrap is too complicated or expensive? Then our FLOW DOWN® logo lettering is the perfect solution! Combined with a window tint strip, you can give your vehicle a sporty, individual look – without much effort and at a fraction of the cost of a full wrap.\u003c\/p\u003e\n\u003ch2\u003eProduct Advantages\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium Oracal film\u003c\/strong\u003e - High-quality brand products for long-lasting results\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV-resistant\u003c\/strong\u003e - Colors remain brilliant even after years\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuitable for high pressure and car washes\u003c\/strong\u003e - Withstands every car wash\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemovable without residue\u003c\/strong\u003e - No adhesive residue when peeling off\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy assembly\u003c\/strong\u003e - Suitable for self-application, even for beginners\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCost-effective alternative\u003c\/strong\u003e - Individual look without expensive full wrapping\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003escope of delivery\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2x FLOW DOWN® lettering bottom stickers for L+R\u003c\/li\u003e\n\u003cli\u003e1x Domain for rear bumper\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eassembly Instructions\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eThoroughly clean and degrease the surface.\u003c\/li\u003e\n\u003cli\u003eCarefully peel off the backing film.\u003c\/li\u003e\n\u003cli\u003eAlign the sticker precisely and stick it on.\u003c\/li\u003e\n\u003cli\u003eUse the squeegee to push out air bubbles from the inside out.\u003c\/li\u003e\n\u003cli\u003eSlowly peel off the transfer film.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003ePro tip\u003c\/h3\u003e\n\u003cp\u003eFor best results, process at room temperature (approx. 20°C). The film can tear when repeatedly peeling it back for alignment – so work carefully!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA notice:\u003c\/strong\u003e The product is sold without warranty in case of incorrect use or on sealed\/waxed surfaces.\u003c\/p\u003e","brand":"FLOW DOWN®","offers":[{"title":"White \/ FLOW DOWN","offer_id":53421647003912,"sku":null,"price":24.9,"currency_code":"EUR","in_stock":true},{"title":"White \/ FLWDWN","offer_id":53423432368392,"sku":null,"price":24.9,"currency_code":"EUR","in_stock":true},{"title":"Black Matt \/ FLOW DOWN","offer_id":53421647036680,"sku":null,"price":24.9,"currency_code":"EUR","in_stock":true},{"title":"Black Matt \/ FLWDWN","offer_id":53423432401160,"sku":null,"price":24.9,"currency_code":"EUR","in_stock":true},{"title":"Degree \/ FLOW DOWN","offer_id":53421647069448,"sku":null,"price":24.9,"currency_code":"EUR","in_stock":true},{"title":"Degree \/ FLWDWN","offer_id":53423432433928,"sku":null,"price":24.9,"currency_code":"EUR","in_stock":true},{"title":"Red \/ FLOW DOWN","offer_id":53421695107336,"sku":null,"price":24.9,"currency_code":"EUR","in_stock":true},{"title":"Red \/ FLWDWN","offer_id":53423432466696,"sku":null,"price":24.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/36B13215-42A8-4E35-A32D-95DF83F5EB00.png?v=1772557223"},{"product_id":"carbon-blende-nierengrill-passend-fur-bmw-m3-m4-g80-g81-g82-g83","title":"Carbon trim behind the kidney grille suitable for BMW M3\/M4 (G80\/G81\/G82\/G83)","description":"\u003ch1\u003eCarbon fiber trim behind kidney grille, suitable for BMW M3 \/ M4 G80 G81 G82 G83\u003c\/h1\u003e\n\n\u003cp\u003eCarbon fiber trim behind kidney grille, suitable for BMW M3 and BMW MThe G80, G81, G82 and G83 visibly enhances the front area and covers the standard area behind the grille with a high-quality carbon fiber surface. This creates a significantly more elegant and sporty look in the visible front area.\u003c\/p\u003e\n\n\u003cp\u003eManufactured from genuine carbon fiber using an autoclave process, this component impresses with its high strength, low weight, and clean finish. The surface is sealed with a clear lacquer and is UV-resistant, ensuring long-term protection of the carbon fiber structure.\u003c\/p\u003e\n\n\u003cp\u003eInstallation is straightforward in the visible area behind the kidney grille. The trim piece was designed to fit BMW models. M3 G80 \/ G81 and BMW M4 G82 \/ G83 developed and ensures a high-quality OEM+ look without complex modifications.\u003c\/p\u003e\n\n\u003ch2\u003eproduct details\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for BMW M3 G80 \/ G81 and BMW M4 G82 \/ G83\u003c\/li\u003e\n  \u003cli\u003eCarbon fiber trim for the area behind the kidney grille\u003c\/li\u003e\n  \u003cli\u003eMade from genuine carbon fiber using the autoclave process\u003c\/li\u003e\n  \u003cli\u003eClear-coat sealed and UV-resistant surface\u003c\/li\u003e\n  \u003cli\u003eSporty and high-quality upgrade of the front area\u003c\/li\u003e\n  \u003cli\u003eEasy installation without complex modifications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eVehicle compatibility\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSuitable for the following models:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eBMW M3 G80\u003c\/li\u003e\n  \u003cli\u003eBMW M3 Touring G81\u003c\/li\u003e\n  \u003cli\u003eBMW M4 G82\u003c\/li\u003e\n  \u003cli\u003eBMW M4 Cabrio G83\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMaterial and workmanship\u003c\/h2\u003e\n\u003cp\u003eOur carbon fiber trim is manufactured using an autoclave process. This process ensures exceptionally precise processing of the carbon fiber, resulting in a uniform structure, high stability, and a premium surface finish. The result is a durable carbon fiber component for the visible front of your vehicle.\u003c\/p\u003e\n\n\u003ch2\u003enotice\u003c\/h2\u003e\n\u003cp\u003eNot an original BMW product. This is a high-quality aftermarket tuning part.\u003c\/p\u003e","brand":"FLOW DOWN®","offers":[{"title":"Default Title","offer_id":55809935245576,"sku":"FDE064","price":239.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/CarbonBlendehinterNierengrillfuerBMWM3_M42.jpg?v=1775509038"},{"product_id":"carbon-frontlippe-fd-trackline-passend-fur-bmw-m3-m4-g80-g81-g82-g83","title":"Carbon Front splitter FD Trackline suitable for BMW M3 M4 G80 G81 G82 G83","description":"\u003ch1\u003eCarbon front splitter FD Trackline suitable for BMW M3 G80, M3 G81, M4 G82, M4 G83 with part type approval – no registration required in Germany\u003c\/h1\u003e\n\n\u003cp\u003eCarbon front splitter FD Trackline suitable for BMW M3 G80, BMW M3 G81, BMW M4 G82 and BMW M4 G83. The pronounced, sporty line for anyone who wants to take their G-generation M3 or M4 towards a track look - no inspection appointment, no registration. Made from dry carbon prepreg in an autoclave, fitting precisely on the factory mounting points.\u003c\/p\u003e\n\n\u003ch2\u003ePart type approval - no registration required in Germany\u003c\/h2\u003e\n\u003cp\u003eWith part type approval, the front splitter requires no registration in Germany. No inspection appointment, no individual approval under §21 StVZO (German law), no registration fee - which saves you the effort a simple material certificate would involve.\u003c\/p\u003e\n\n\u003ch2\u003eProvide your vehicle identification number (VIN) when ordering\u003c\/h2\u003e\n\u003cp\u003eThe part type approval is issued for your vehicle identification number (VIN) and is only valid together with that VIN. You enter the VIN when ordering, we record it in our system and enclose the approval document with the delivery. Without a VIN the document cannot be issued.\u003c\/p\u003e\n\n\u003ch2\u003eHighlights\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003ePart type approval - no registration required in Germany\u003c\/li\u003e\n  \u003cli\u003eDry carbon prepreg, autoclave-cured\u003c\/li\u003e\n  \u003cli\u003eClassic 3K carbon with high-gloss UV lacquer\u003c\/li\u003e\n  \u003cli\u003ePrecise fit via the factory mounting points\u003c\/li\u003e\n  \u003cli\u003e3-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMaterial\u003c\/h2\u003e\n\u003cp\u003eDry carbon prepreg, autoclave-cured. Higher strength, lower weight, flawless visible finish. The standard is classic 3K carbon with high-gloss UV lacquer - UV-stable and non-yellowing.\u003c\/p\u003e\n\n\u003ch2\u003eForged carbon available on request\u003c\/h2\u003e\n\u003cp\u003eAvailable on request in a forged carbon finish. Surcharge from +25 %, made to order with a longer lead time. Please contact FLOW DOWN® support before ordering.\u003c\/p\u003e\n\n\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for BMW M3 G80 Saloon (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M3 G81 Touring (S58, from 2022)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M4 G82 Coupé (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M4 G83 Convertible (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eAlso suitable for: suitable for BMW M3 CS G80, suitable for BMW M4 CS G82, suitable for BMW M4 CSL G82 - provided the factory M3\/M4 front bumper is fitted\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot suitable for: BMW M3 F80 \/ M4 F82 (previous generations), BMW 3 Series G20 \/ 4 Series G22 (non-M models), BMW M2 G87 (different front-end profile).\u003c\/p\u003e\n\n\u003ch2\u003eBody kit and carbon parts fitting at FLOW DOWN® in Essen\u003c\/h2\u003e\n\u003cp\u003eFor years FLOW DOWN® has been a go-to address in the Ruhr region for fitting body kits and carbon parts. Our own workshop in Essen, no third-party subcontracting. You can book body kit fitting directly as a service in the shop.\u003ca href=\"https:\/\/flow-down.com\/products\/bodykit-montage\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch2\u003eScope of delivery\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1× carbon front splitter FD Trackline\u003c\/li\u003e\n  \u003cli\u003e1× part type approval, issued for your VIN\u003c\/li\u003e\n  \u003cli\u003e1× warranty card (3 years)\u003c\/li\u003e\n  \u003cli\u003ePackaging with edge protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRoad-legality notes\u003c\/h2\u003e\n\u003cp\u003eWith part type approval, no registration is required in Germany - no individual inspection under §21 StVZO (German law). The approval is only valid together with the registered VIN and must be available for inspection during a traffic check. For imported vehicles, or where additional parts not covered by the approval are fitted, please check with our support team first.\u003c\/p\u003e","brand":"Max Carbon","offers":[{"title":"Default Title","offer_id":58107468185864,"sku":"D-T-448","price":1199.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/P-9Y01-DP-K1_0f64af07-25db-413e-b20e-defecc30634e.jpg?v=1782670855"},{"product_id":"carbon-frontlippe-fd-aeroline-passend-fur-bmw-m3-m4-g80-g81-g82-g83","title":"Carbon Front splitter FD Aeroline suitable for BMW M3 M4 G80 G81 G82 G83","description":"\u003ch1\u003eCarbon front splitter FD Aeroline suitable for BMW M3 G80, M3 G81, M4 G82, M4 G83 with part type approval – no registration required in Germany\u003c\/h1\u003e\n\n\u003cp\u003eCarbon front splitter FD Aeroline suitable for BMW M3 G80, BMW M3 G81, BMW M4 G82 and BMW M4 G83. The boldest line in our FD range - a pronounced splitter, race-oriented geometry and a clear track look. For anyone who wants to make a statement with their G-generation M3 or M4 without the hassle of registering the part. Made from dry carbon prepreg in an autoclave, fitting precisely on the factory mounting points.\u003c\/p\u003e\n\n\u003ch2\u003ePart type approval - no registration required in Germany\u003c\/h2\u003e\n\u003cp\u003eDespite its pronounced geometry, the FD Aeroline requires no registration in Germany - thanks to part type approval. No inspection appointment, no individual approval under §21 StVZO (German law), no registration fee. You drive straight away with a valid vehicle registration document.\u003c\/p\u003e\n\n\u003ch2\u003eProvide your vehicle identification number (VIN) when ordering\u003c\/h2\u003e\n\u003cp\u003eThe part type approval is personalised and only valid together with your vehicle identification number (VIN). You enter the VIN in the order form, we record it in our system and issue the approval document for your vehicle. Without a VIN the document cannot be issued.\u003c\/p\u003e\n\n\u003ch2\u003eHighlights\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003ePart type approval - no registration required in Germany\u003c\/li\u003e\n  \u003cli\u003eDry carbon prepreg, autoclave-cured\u003c\/li\u003e\n  \u003cli\u003eClassic 3K carbon with high-gloss UV lacquer\u003c\/li\u003e\n  \u003cli\u003ePronounced splitter, race-oriented geometry\u003c\/li\u003e\n  \u003cli\u003e3-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMaterial\u003c\/h2\u003e\n\u003cp\u003eDry carbon prepreg fabric is supplied pre-impregnated with resin and cured in an autoclave under pressure and heat. The result: higher strength, lower weight, a flawless visible finish. The standard is classic 3K carbon with high-gloss UV lacquer - UV-stable and non-yellowing.\u003c\/p\u003e\n\n\u003ch2\u003eForged carbon available on request\u003c\/h2\u003e\n\u003cp\u003eAlso available on request in a forged carbon finish. Surcharge from +25 %, made to order with a longer lead time. Please contact FLOW DOWN® support before ordering.\u003c\/p\u003e\n\n\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for BMW M3 G80 Saloon (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M3 G81 Touring (S58, from 2022)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M4 G82 Coupé (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M4 G83 Convertible (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eAlso suitable for: suitable for BMW M3 CS G80, suitable for BMW M4 CS G82, suitable for BMW M4 CSL G82 - provided the factory M3\/M4 front bumper is fitted\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot suitable for: BMW M3 F80 \/ M4 F82 (previous generations), BMW 3 Series G20 \/ 4 Series G22 (non-M models), BMW M2 G87 (different front-end profile).\u003c\/p\u003e\n\n\u003ch2\u003eBody kit and carbon parts fitting at FLOW DOWN® in Essen\u003c\/h2\u003e\n\u003cp\u003eFor years FLOW DOWN® has been a go-to address in the Ruhr region for fitting body kits and carbon parts. Our own workshop in Essen, no third-party subcontracting. With a pronounced front splitter like the Aeroline in particular, we recommend professional fitting - you can book body kit fitting directly as a service in the shop.\u003ca href=\"https:\/\/flow-down.com\/products\/bodykit-montage\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch2\u003eScope of delivery\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1× carbon front splitter FD Aeroline\u003c\/li\u003e\n  \u003cli\u003e1× part type approval, issued for your VIN\u003c\/li\u003e\n  \u003cli\u003e1× warranty card (3 years)\u003c\/li\u003e\n  \u003cli\u003ePackaging with edge protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRoad-legality notes\u003c\/h2\u003e\n\u003cp\u003eWith part type approval, no registration is required in Germany - no individual inspection under §21 StVZO (German law). The approval is only valid together with the registered VIN and must be available for inspection during a traffic check. For imported vehicles, or where additional parts not covered by the approval are fitted, please check with our support team first.\u003c\/p\u003e","brand":"Max Carbon","offers":[{"title":"Default Title","offer_id":58107468218632,"sku":"D-T-199","price":1199.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/B-G87-KG-ONE-Y8_28b3ad40-1e3a-4e4e-93ad-ff05fe317af7.jpg?v=1782670858"},{"product_id":"carbon-frontlippe-fd-streetline-passend-fur-bmw-m3-m4-g80-g81-g82-g83","title":"Carbon Front splitter FD Streetline suitable for BMW M3 M4 G80 G81 G82 G83","description":"\u003ch1\u003eCarbon front splitter FD Streetline suitable for BMW M3 G80, M3 G81, M4 G82, M4 G83 with part type approval – no registration required in Germany\u003c\/h1\u003e\n\n\u003cp\u003eCarbon front splitter FD Streetline suitable for BMW M3 G80, BMW M3 G81, BMW M4 G82 and BMW M4 G83. For anyone who did not order a factory carbon front part on their G-generation M3 or M4, or who is looking for a distinctive look beyond the factory package. Made from dry carbon prepreg in an autoclave, fitting precisely on the factory mounting points. With part type approval, no registration is required in Germany.\u003c\/p\u003e\n\n\u003ch2\u003ePart type approval - no registration required in Germany\u003c\/h2\u003e\n\u003cp\u003eMost aftermarket carbon front splitters only come with a material certificate and require individual approval under §21 StVZO (German law). This splitter has part type approval - which saves you the inspection appointment, the registration fee and the paperwork. Ready to drive with a valid vehicle registration document.\u003c\/p\u003e\n\n\u003ch2\u003eProvide your vehicle identification number (VIN) when ordering\u003c\/h2\u003e\n\u003cp\u003eThe part type approval is personalised and only valid together with the vehicle identification number (VIN). You enter your VIN when ordering. We record it in our system and issue the approval document for your vehicle - so you can drive without registering the part. Without a VIN the document cannot be issued.\u003c\/p\u003e\n\n\u003ch2\u003eHighlights\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003ePart type approval - no registration required in Germany\u003c\/li\u003e\n  \u003cli\u003eDry carbon prepreg, autoclave-cured\u003c\/li\u003e\n  \u003cli\u003eClassic 3K carbon with high-gloss UV lacquer\u003c\/li\u003e\n  \u003cli\u003ePrecise fit via the factory mounting points\u003c\/li\u003e\n  \u003cli\u003e3-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMaterial\u003c\/h2\u003e\n\u003cp\u003eDry carbon prepreg made in an autoclave. Pre-impregnated carbon fabric is cured under pressure and heat - higher strength, lower weight, flawless visible finish. The standard is classic 3K carbon with high-gloss UV lacquer, UV-stable and non-yellowing.\u003c\/p\u003e\n\n\u003ch2\u003eForged carbon available on request\u003c\/h2\u003e\n\u003cp\u003eAvailable on request in a forged carbon finish. Surcharge from +25 %, made to order with a longer lead time. Please contact FLOW DOWN® support before ordering.\u003c\/p\u003e\n\n\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for BMW M3 G80 Saloon (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M3 G81 Touring (S58, from 2022)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M4 G82 Coupé (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M4 G83 Convertible (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eAlso suitable for special editions: suitable for BMW M3 CS G80, suitable for BMW M4 CS G82, suitable for BMW M4 CSL G82 - provided the factory M3\/M4 front bumper is fitted\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot suitable for: BMW M3 F80 \/ M4 F82 (previous generations), BMW 3 Series G20 \/ 4 Series G22 (non-M models), BMW M2 G87 (different front-end profile).\u003c\/p\u003e\n\n\u003ch2\u003eBody kit and carbon parts fitting at FLOW DOWN® in Essen\u003c\/h2\u003e\n\u003cp\u003eFor years FLOW DOWN® has been a go-to address in the Ruhr region for fitting body kits and carbon parts. Our own workshop in Essen, no third-party subcontracting. You can book body kit fitting directly as a service in the shop.\u003ca href=\"https:\/\/flow-down.com\/products\/bodykit-montage\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch2\u003eScope of delivery\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1× carbon front splitter FD Streetline\u003c\/li\u003e\n  \u003cli\u003e1× part type approval, issued for your VIN\u003c\/li\u003e\n  \u003cli\u003e1× warranty card (3 years)\u003c\/li\u003e\n  \u003cli\u003ePackaging with edge protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRoad-legality notes\u003c\/h2\u003e\n\u003cp\u003eWith part type approval, no registration is required in Germany - no individual inspection under §21 StVZO (German law) is needed. The approval is only valid together with the registered VIN and must be available for inspection during a traffic check. For imported vehicles, or where additional parts not covered by the approval are fitted, please check with our support team first.\u003c\/p\u003e","brand":"Max Carbon","offers":[{"title":"Default Title","offer_id":58107468251400,"sku":"D-T-171","price":1199.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/P-9Y01-DP-K0_da2acd32-96ef-4aa5-8d5f-ed42ef0044dd.jpg?v=1782670861"},{"product_id":"carbon-frontlippe-fd-performance-passend-fur-bmw-m3-m4-g80-g81-g82-g83","title":"Carbon Front splitter FD Performance suitable for BMW M3 M4 G80 G81 G82 G83","description":"\u003ch1\u003eCarbon front splitter FD Performance suitable for BMW M3 G80, M3 G81, M4 G82, M4 G83 with part type approval – no registration required in Germany\u003c\/h1\u003e\n\n\u003cp\u003eCarbon front splitter FD Performance suitable for BMW M3 G80, BMW M3 G81, BMW M4 G82 and BMW M4 G83. A sporty, performance-oriented line for anyone who wants a clear accent at the front of their G-generation M3 or M4 - no inspection appointment and no registration. Made from dry carbon prepreg in an autoclave, fitting precisely on the factory mounting points.\u003c\/p\u003e\n\n\u003ch2\u003ePart type approval - no registration required in Germany\u003c\/h2\u003e\n\u003cp\u003eThis front splitter has part type approval and therefore requires no registration in Germany. You save yourself the individual approval under §21 StVZO (German law), the registration fee and the paperwork that a simple material certificate would involve.\u003c\/p\u003e\n\n\u003ch2\u003eProvide your vehicle identification number (VIN) when ordering\u003c\/h2\u003e\n\u003cp\u003eThe part type approval is personalised. When ordering you enter your vehicle identification number (VIN), we record it in our system and issue the approval document for your vehicle. Without a VIN the document cannot be issued - and without the document the front splitter is not exempt from registration.\u003c\/p\u003e\n\n\u003ch2\u003eHighlights\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003ePart type approval - no registration required in Germany\u003c\/li\u003e\n  \u003cli\u003eDry carbon prepreg, autoclave-cured\u003c\/li\u003e\n  \u003cli\u003eClassic 3K carbon with high-gloss UV lacquer\u003c\/li\u003e\n  \u003cli\u003ePrecise fit via the factory mounting points\u003c\/li\u003e\n  \u003cli\u003e3-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMaterial\u003c\/h2\u003e\n\u003cp\u003eDry carbon prepreg, cured in an autoclave under pressure and heat - higher strength, lower weight and a flawless visible finish compared with wet carbon. The standard is classic 3K carbon with high-gloss UV lacquer, UV-stable and non-yellowing.\u003c\/p\u003e\n\n\u003ch2\u003eForged carbon available on request\u003c\/h2\u003e\n\u003cp\u003eAvailable on request in a forged carbon finish. Surcharge from +25 %, made to order with a longer lead time. Please contact FLOW DOWN® support before ordering.\u003c\/p\u003e\n\n\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for BMW M3 G80 Saloon (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M3 G81 Touring (S58, from 2022)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M4 G82 Coupé (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M4 G83 Convertible (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eAlso suitable for: suitable for BMW M3 CS G80, suitable for BMW M4 CS G82, suitable for BMW M4 CSL G82 - provided the factory M3\/M4 front bumper is fitted\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot suitable for: BMW M3 F80 \/ M4 F82 (previous generations), BMW 3 Series G20 \/ 4 Series G22 (non-M models), BMW M2 G87 (different front-end profile).\u003c\/p\u003e\n\n\u003ch2\u003eBody kit and carbon parts fitting at FLOW DOWN® in Essen\u003c\/h2\u003e\n\u003cp\u003eFor years FLOW DOWN® has been a go-to address in the Ruhr region for fitting body kits and carbon parts. Our own workshop in Essen, no third-party subcontracting. You can book body kit fitting directly as a service in the shop.\u003ca href=\"https:\/\/flow-down.com\/products\/bodykit-montage\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch2\u003eScope of delivery\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1× carbon front splitter FD Performance\u003c\/li\u003e\n  \u003cli\u003e1× part type approval, issued for your VIN\u003c\/li\u003e\n  \u003cli\u003e1× warranty card (3 years)\u003c\/li\u003e\n  \u003cli\u003ePackaging with edge protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRoad-legality notes\u003c\/h2\u003e\n\u003cp\u003eWith part type approval, no registration is required in Germany - no individual inspection under §21 StVZO (German law). The approval is only valid together with the registered VIN and must be available for inspection during a traffic check. For imported vehicles, or where additional parts not covered by the approval are fitted, please check with our support team first.\u003c\/p\u003e","brand":"Max Carbon","offers":[{"title":"Default Title","offer_id":58107468284168,"sku":"D-T-078","price":1149.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/P-9Y01-DP-K1_9646209a-bd9c-49f8-a958-a62ea1384b02.jpg?v=1782670865"},{"product_id":"carbon-frontansatz-ecke-passend-fur-bmw-m3-m4-g80-g81-g82-g83","title":"Carbon Front splitter corner suitable for BMW M3 M4 G80 G81 G82 G83","description":"\u003ch1\u003eCarbon front splitter corner suitable for BMW M3 G80, M3 G81, M4 G82, M4 G83 with part type approval – no registration required in Germany\u003c\/h1\u003e\n\n\u003cp\u003eCarbon front splitter corners suitable for BMW M3 G80, BMW M3 G81, BMW M4 G82 and BMW M4 G83. The corner pieces sit at the sides of the front bumper and complement the look of a carbon front splitter, or work equally well on their own. Made from dry carbon prepreg in an autoclave, fitting precisely on the factory mounting points. With part type approval, no registration is required in Germany.\u003c\/p\u003e\n\n\u003ch2\u003ePart type approval - no registration required in Germany\u003c\/h2\u003e\n\u003cp\u003eWith part type approval, the front splitter requires no registration in Germany. No inspection appointment, no individual approval under §21 StVZO (German law), no registration fee.\u003c\/p\u003e\n\n\u003ch2\u003eProvide your vehicle identification number (VIN) when ordering\u003c\/h2\u003e\n\u003cp\u003eThe part type approval is issued for your vehicle identification number (VIN). You enter the VIN when ordering, we record it in our system and enclose the approval document with the delivery. Without a VIN the document cannot be issued.\u003c\/p\u003e\n\n\u003ch2\u003eHighlights\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003ePart type approval - no registration required in Germany\u003c\/li\u003e\n  \u003cli\u003eDry carbon prepreg, autoclave-cured\u003c\/li\u003e\n  \u003cli\u003eClassic 3K carbon with high-gloss UV lacquer\u003c\/li\u003e\n  \u003cli\u003ePrecise fit via the factory mounting points\u003c\/li\u003e\n  \u003cli\u003e3-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMaterial\u003c\/h2\u003e\n\u003cp\u003eDry carbon prepreg, autoclave-cured. Higher strength, lower weight, flawless visible finish. The standard is classic 3K carbon with high-gloss UV lacquer - UV-stable and non-yellowing.\u003c\/p\u003e\n\n\u003ch2\u003eForged carbon available on request\u003c\/h2\u003e\n\u003cp\u003eAvailable on request in a forged carbon finish. Surcharge from +25 %, made to order. Please contact FLOW DOWN® support before ordering.\u003c\/p\u003e\n\n\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for BMW M3 G80 Saloon (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M3 G81 Touring (S58, from 2022)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M4 G82 Coupé (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M4 G83 Convertible (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eAlso suitable for: suitable for BMW M3 CS G80, suitable for BMW M4 CS G82, suitable for BMW M4 CSL G82 - provided the factory M3\/M4 front bumper is fitted\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBody kit and carbon parts fitting at FLOW DOWN® in Essen\u003c\/h2\u003e\n\u003cp\u003eFor years FLOW DOWN® has been a go-to address in the Ruhr region for fitting body kits and carbon parts. Our own workshop in Essen, no third-party subcontracting. You can book body kit fitting directly as a service in the shop.\u003ca href=\"https:\/\/flow-down.com\/products\/bodykit-montage\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch2\u003eScope of delivery\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1× set of carbon front splitter corners (left + right)\u003c\/li\u003e\n  \u003cli\u003e1× part type approval, issued for your VIN\u003c\/li\u003e\n  \u003cli\u003e1× warranty card (3 years)\u003c\/li\u003e\n  \u003cli\u003ePackaging with edge protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRoad-legality notes\u003c\/h2\u003e\n\u003cp\u003eWith part type approval, no registration is required in Germany - no individual inspection under §21 StVZO (German law). The approval is only valid together with the registered VIN and must be available for inspection during a traffic check.\u003c\/p\u003e","brand":"Max Carbon","offers":[{"title":"Default Title","offer_id":58107468316936,"sku":"D-T-095","price":469.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/B-G80-FL-ECKE-D0.jpg?v=1782670868"},{"product_id":"carbon-front-canards-fd-streetline-passend-fur-bmw-m3-m4-g80-g81-g82-g83","title":"Carbon Front canards FD Streetline suitable for BMW M3 M4 G80 G81 G82 G83","description":"\u003ch1\u003eCarbon front canards FD Streetline suitable for BMW M3 G80, M3 G81, M4 G82, M4 G83 with part type approval – no registration required in Germany\u003c\/h1\u003e\n\n\u003cp\u003eCarbon front canards FD Streetline suitable for BMW M3 G80, BMW M3 G81, BMW M4 G82 and BMW M4 G83. The most understated canard version in our FD range - it accentuates the front air intakes without becoming loud. Made from dry carbon prepreg in an autoclave, fitting precisely on the factory mounting points. With part type approval, no registration is required in Germany.\u003c\/p\u003e\n\n\u003ch2\u003ePart type approval - no registration required in Germany\u003c\/h2\u003e\n\u003cp\u003eWith part type approval, the canards require no registration in Germany. No inspection appointment, no individual approval under §21 StVZO (German law).\u003c\/p\u003e\n\n\u003ch2\u003eProvide your vehicle identification number (VIN) when ordering\u003c\/h2\u003e\n\u003cp\u003eThe part type approval is issued for your vehicle identification number (VIN). You enter the VIN when ordering, we record it in our system and enclose the approval document with the delivery. Without a VIN the document cannot be issued.\u003c\/p\u003e\n\n\u003ch2\u003eHighlights\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003ePart type approval - no registration required in Germany\u003c\/li\u003e\n  \u003cli\u003eDry carbon prepreg, autoclave-cured\u003c\/li\u003e\n  \u003cli\u003eClassic 3K carbon with high-gloss UV lacquer\u003c\/li\u003e\n  \u003cli\u003ePrecise fit via the factory mounting points\u003c\/li\u003e\n  \u003cli\u003e3-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMaterial\u003c\/h2\u003e\n\u003cp\u003eDry carbon prepreg, autoclave-cured. Higher strength, lower weight, flawless visible finish. The standard is classic 3K carbon with high-gloss UV lacquer, UV-stable.\u003c\/p\u003e\n\n\u003ch2\u003eForged carbon available on request\u003c\/h2\u003e\n\u003cp\u003eAvailable on request in a forged carbon finish. Surcharge from +25 %, made to order. Please contact FLOW DOWN® support before ordering.\u003c\/p\u003e\n\n\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for BMW M3 G80 Saloon (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M3 G81 Touring (S58, from 2022)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M4 G82 Coupé (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M4 G83 Convertible (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eAlso suitable for: suitable for BMW M3 CS G80, suitable for BMW M4 CS G82, suitable for BMW M4 CSL G82\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBody kit and carbon parts fitting at FLOW DOWN® in Essen\u003c\/h2\u003e\n\u003cp\u003eFor years FLOW DOWN® has been a go-to address in the Ruhr region for fitting body kits and carbon parts. Our own workshop in Essen, no third-party subcontracting. You can book body kit fitting directly as a service in the shop.\u003ca href=\"https:\/\/flow-down.com\/products\/bodykit-montage\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch2\u003eScope of delivery\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1× set of carbon front canards FD Streetline (left + right)\u003c\/li\u003e\n  \u003cli\u003e1× part type approval, issued for your VIN\u003c\/li\u003e\n  \u003cli\u003e1× warranty card (3 years)\u003c\/li\u003e\n  \u003cli\u003ePackaging with edge protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRoad-legality notes\u003c\/h2\u003e\n\u003cp\u003eWith part type approval, no registration is required in Germany - no individual inspection under §21 StVZO (German law). The approval is only valid together with the registered VIN.\u003c\/p\u003e","brand":"Max Carbon","offers":[{"title":"Default Title","offer_id":58107468349704,"sku":"D-T-093","price":269.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/B-G87-KG-ONE-Y0_50553c87-f5b0-4e54-a933-4c908a2a6bdf.jpg?v=1782670873"},{"product_id":"carbon-lufteinsatze-front-passend-fur-bmw-m3-m4-g80-g81-g82-g83","title":"Carbon Front air inserts suitable for BMW M3 M4 G80 G81 G82 G83","description":"\u003ch1\u003eCarbon Lufteinsätze Front suitable for BMW M3 G80, M3 G81, M4 G82, M4 G83 – Materialgutachten, TTG in Vorbereitung\u003c\/h1\u003e\n\n\u003cp\u003eCarbon front air intake inserts suitable for BMW M3 G80, BMW M3 G81, BMW M4 G82 and BMW M4 G83. The carbon inserts replace the factory plastic trims in the front air intakes of the bumper and create a clear carbon accent at the front. Made from dry carbon prepreg in an autoclave, fitting precisely on the factory mounting points.\u003c\/p\u003e\n\n\u003ch2\u003eRoad legality - material certificate, part type approval in preparation\u003c\/h2\u003e\n\u003cp\u003eA material certificate is currently available for this part. Individual approval under §21 StVZO (German law) by an inspection body (TÜV, GTÜ or DEKRA) is required before the vehicle may be driven on public roads. A part type approval is being prepared at the KBA (German federal motor transport authority) - once it is in place no registration is needed and the approval can be applied for retrospectively.\u003c\/p\u003e\n\n\u003ch2\u003eHighlights\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial certificate for individual approval under §21 StVZO (German law)\u003c\/li\u003e\n  \u003cli\u003ePart type approval being prepared at the KBA - can be applied for retrospectively\u003c\/li\u003e\n  \u003cli\u003eDry carbon prepreg, autoclave-cured\u003c\/li\u003e\n  \u003cli\u003eClassic 3K carbon with high-gloss UV lacquer\u003c\/li\u003e\n  \u003cli\u003e3-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMaterial\u003c\/h2\u003e\n\u003cp\u003eDry carbon prepreg, cured in an autoclave under pressure and heat. High strength, low weight, flawless visible finish. The standard is classic 3K carbon with high-gloss UV lacquer - UV-stable and non-yellowing.\u003c\/p\u003e\n\n\u003ch2\u003eForged carbon available on request\u003c\/h2\u003e\n\u003cp\u003eAvailable on request in a forged carbon finish. Surcharge from +25 %, made to order. Please contact FLOW DOWN® support before ordering.\u003c\/p\u003e\n\n\u003ch2\u003eMesh available as an option\u003c\/h2\u003e\n\u003cp\u003eThe air intake inserts are available on request with a black mesh - surcharge 70 €. For anyone who wants a closed-off race look behind the carbon insert.\u003c\/p\u003e\n\n\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for BMW M3 G80 Saloon (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M3 G81 Touring (S58, from 2022)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M4 G82 Coupé (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M4 G83 Convertible (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eAlso suitable for: suitable for BMW M3 CS G80, suitable for BMW M4 CS G82, suitable for BMW M4 CSL G82\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBody kit and carbon parts fitting at FLOW DOWN® in Essen\u003c\/h2\u003e\n\u003cp\u003eFor years FLOW DOWN® has been a go-to address in the Ruhr region for fitting body kits and carbon parts. Our own workshop in Essen, no third-party subcontracting. You can book body kit fitting directly as a service in the shop - and on request we also present the car at the inspection body for the individual approval under §21.\u003ca href=\"https:\/\/flow-down.com\/products\/bodykit-montage\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch2\u003eScope of delivery\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1× set of carbon front air intake inserts (left + right)\u003c\/li\u003e\n  \u003cli\u003e1× material certificate for individual approval under §21\u003c\/li\u003e\n  \u003cli\u003e1× warranty card (3 years)\u003c\/li\u003e\n  \u003cli\u003ePackaging with edge protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRoad-legality notes\u003c\/h2\u003e\n\u003cp\u003eAt present: individual approval under §21 StVZO (German law) at an inspection body is required. The enclosed material certificate is the basis for that inspection. As soon as the part type approval has been granted by the KBA (German federal motor transport authority) you can apply for it retrospectively - from then on no registration is needed. We actively inform buyers as soon as the approval is available.\u003c\/p\u003e","brand":"Max Carbon","offers":[{"title":"Default Title","offer_id":58107468382472,"sku":"Y-EX-G80-LE-VR","price":699.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/B-G87-KG-ONE-Y7_3799a924-ce77-4da3-9b69-8ecfd4ee8b1c_2.jpg?v=1782670878"},{"product_id":"carbon-front-canards-fd-trackline-passend-fur-bmw-m3-m4-g80-g81-g82-g83","title":"Carbon Front canards FD Trackline suitable for BMW M3 M4 G80 G81 G82 G83","description":"\u003ch1\u003eCarbon front canards FD Trackline suitable for BMW M3 G80, M3 G81, M4 G82, M4 G83 with part type approval – no registration required in Germany\u003c\/h1\u003e\n\n\u003cp\u003eCarbon front canards FD Trackline suitable for BMW M3 G80, BMW M3 G81, BMW M4 G82 and BMW M4 G83. The pronounced, sporty canard version for anyone who wants a clear track accent at the front. Made from dry carbon prepreg in an autoclave, fitting precisely on the factory mounting points. With part type approval, no registration is required in Germany.\u003c\/p\u003e\n\n\u003ch2\u003ePart type approval - no registration required in Germany\u003c\/h2\u003e\n\u003cp\u003eWith part type approval, the canards require no registration in Germany. No inspection appointment, no individual approval under §21 StVZO (German law), no registration fee.\u003c\/p\u003e\n\n\u003ch2\u003eProvide your vehicle identification number (VIN) when ordering\u003c\/h2\u003e\n\u003cp\u003eThe part type approval is personalised to your vehicle identification number. You enter the VIN when ordering, we register it and issue the approval document for your vehicle. Without a VIN the document cannot be issued.\u003c\/p\u003e\n\n\u003ch2\u003eHighlights\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003ePart type approval - no registration required in Germany\u003c\/li\u003e\n  \u003cli\u003eDry carbon prepreg, autoclave-cured\u003c\/li\u003e\n  \u003cli\u003eClassic 3K carbon with high-gloss UV lacquer\u003c\/li\u003e\n  \u003cli\u003ePrecise fit via the factory mounting points\u003c\/li\u003e\n  \u003cli\u003e3-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMaterial\u003c\/h2\u003e\n\u003cp\u003eDry carbon prepreg, cured in an autoclave under pressure and heat. The standard is classic 3K carbon with high-gloss UV lacquer - UV-stable and non-yellowing.\u003c\/p\u003e\n\n\u003ch2\u003eForged carbon available on request\u003c\/h2\u003e\n\u003cp\u003eAvailable on request in a forged carbon finish. Surcharge from +25 %, made to order. Please contact FLOW DOWN® support before ordering.\u003c\/p\u003e\n\n\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for BMW M3 G80 Saloon (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M3 G81 Touring (S58, from 2022)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M4 G82 Coupé (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M4 G83 Convertible (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eAlso suitable for: suitable for BMW M3 CS G80, suitable for BMW M4 CS G82, suitable for BMW M4 CSL G82\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBody kit and carbon parts fitting at FLOW DOWN® in Essen\u003c\/h2\u003e\n\u003cp\u003eFor years FLOW DOWN® has been a go-to address in the Ruhr region for fitting body kits and carbon parts. Our own workshop in Essen, no third-party subcontracting. You can book body kit fitting directly as a service in the shop.\u003ca href=\"https:\/\/flow-down.com\/products\/bodykit-montage\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch2\u003eScope of delivery\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1× set of carbon front canards FD Trackline (left + right)\u003c\/li\u003e\n  \u003cli\u003e1× part type approval, issued for your VIN\u003c\/li\u003e\n  \u003cli\u003e1× warranty card (3 years)\u003c\/li\u003e\n  \u003cli\u003ePackaging with edge protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRoad-legality notes\u003c\/h2\u003e\n\u003cp\u003eWith part type approval, no registration is required in Germany - no individual inspection under §21 StVZO (German law). The approval is only valid together with the registered VIN.\u003c\/p\u003e","brand":"Max Carbon","offers":[{"title":"Default Title","offer_id":58107468415240,"sku":"D-T-080","price":349.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/B-G87-KG-ONE-Y0_fcee4f82-9531-4669-8676-660a91eb76a4.jpg?v=1782670881"},{"product_id":"carbon-kuhlergrill-nieren-fd-trackline-passend-fur-bmw-m3-m4-g80-g81-g82-g83","title":"Carbon Radiator grille Nieren FD Trackline suitable for BMW M3 M4 G80 G81 G82 G83","description":"\u003ch1\u003eCarbon kidney grille FD Trackline suitable for BMW M3 M4 G80 G81 G82 G83\u003c\/h1\u003e\n\n\u003cp\u003eCarbon kidney grille FD Trackline suitable for BMW M3 G80, BMW M3 G81, BMW M4 G82 and BMW M4 G83. A two-piece carbon overlay fitted from the outside over the factory kidney grilles - the original grille stays in place and the carbon element sits visibly on top. Made from dry carbon prepreg in an autoclave.\u003c\/p\u003e\n\n\u003ch2\u003eRoad legality - material certificate, part type approval in preparation\u003c\/h2\u003e\n\u003cp\u003eA material certificate is currently available for this carbon kidney grille. Individual approval under §21 StVZO (German law) by an inspection body (TÜV, GTÜ or DEKRA) is required before the vehicle may be driven on public roads. A part type approval is being prepared at the KBA (German federal motor transport authority) - once it is in place no registration is needed and it can be applied for retrospectively.\u003c\/p\u003e\n\n\u003ch2\u003eHighlights\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial certificate for individual approval under §21 StVZO (German law)\u003c\/li\u003e\n  \u003cli\u003ePart type approval being prepared at the KBA - can be applied for retrospectively\u003c\/li\u003e\n  \u003cli\u003eTwo-piece carbon overlay - the original grille stays in place\u003c\/li\u003e\n  \u003cli\u003eDry carbon prepreg, autoclave-cured\u003c\/li\u003e\n  \u003cli\u003e3-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMaterial\u003c\/h2\u003e\n\u003cp\u003eDry carbon prepreg, cured in an autoclave under pressure and heat. The standard finish is classic 3K carbon with high-gloss UV lacquer - UV-stable and non-yellowing.\u003c\/p\u003e\n\n\u003ch2\u003eForged carbon available on request\u003c\/h2\u003e\n\u003cp\u003eAvailable on request in a forged carbon finish. Surcharge from +25 %, made to order. Please contact FLOW DOWN® support before ordering.\u003c\/p\u003e\n\n\u003ch2\u003eFitting - carbon overlay from the outside\u003c\/h2\u003e\n\u003cp\u003eUnlike a factory replacement grille, which is inserted into the bumper from behind, this carbon grille is fitted from the outside over the factory kidney grilles. The delivery comprises two separate carbon elements - one left, one right. The advantage: the original grille stays completely in place, and fitting is reversible and possible without removing the bumper.\u003c\/p\u003e\n\n\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for BMW M3 G80 Saloon (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M3 G81 Touring (S58, from 2022)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M4 G82 Coupé (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M4 G83 Convertible (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eAlso suitable for: suitable for BMW M3 CS G80, suitable for BMW M4 CS G82, suitable for BMW M4 CSL G82\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBody kit and carbon parts fitting at FLOW DOWN® in Essen\u003c\/h2\u003e\n\u003cp\u003eFor years FLOW DOWN® has been a go-to address in the Ruhr region for fitting body kits and carbon parts. Our own workshop in Essen, no third-party subcontracting. You can book body kit fitting directly as a service in the shop - and on request we also present the car at the inspection body for the individual approval under §21.\u003ca href=\"https:\/\/flow-down.com\/products\/bodykit-montage\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch2\u003eFront number plate - neatly mounted with the hook-and-loop holder\u003c\/h2\u003e\n\u003cp\u003eWith a carbon kidney grille we recommend the FLOW DOWN® hook-and-loop number plate holder. No drilling into the carbon grille, no magnet on the carbon surface - the plate is held by hook-and-loop tape and can be removed whenever you need.\u003ca href=\"https:\/\/flow-down.com\/products\/flow-down-klett-kennzeichenhalter\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch2\u003eScope of delivery\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e2× carbon overlay elements (left + right)\u003c\/li\u003e\n  \u003cli\u003e1× material certificate for individual approval under §21\u003c\/li\u003e\n  \u003cli\u003e1× warranty card (3 years)\u003c\/li\u003e\n  \u003cli\u003ePackaging with edge protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRoad-legality notes\u003c\/h2\u003e\n\u003cp\u003eAt present: individual approval under §21 StVZO (German law) at an inspection body is required. The enclosed material certificate is the basis for that inspection. As soon as the part type approval has been granted by the KBA (German federal motor transport authority) you can apply for it retrospectively - from then on no registration is needed.\u003c\/p\u003e","brand":"Max Carbon","offers":[{"title":"Without adaptive cruise control","offer_id":58107468448008,"sku":"D-T-179","price":1099.0,"currency_code":"EUR","in_stock":true},{"title":"With adaptive cruise control","offer_id":58107468480776,"sku":"D-T-178","price":1099.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/B-G87-KG-ONE-Y0_95cb2f8e-5fc1-4b30-af69-ac6734f81bfe.jpg?v=1782670885"},{"product_id":"carbon-seitenschweller-fd-streetline-passend-fur-bmw-m3-g80-g81","title":"Carbon Side skirts FD Streetline suitable for BMW M3 G80 G81","description":"\u003ch1\u003eCarbon side skirts FD Streetline suitable for BMW M3 G80, M3 G81 with part type approval – no registration required in Germany\u003c\/h1\u003e\n\n\u003cp\u003eCarbon side skirts FD Streetline suitable for BMW M3 G80 and BMW M3 G81. The understated side skirt version with a geometry close to the original - it adds a clear carbon accent along the side without moving into bold race designs. Made from dry carbon prepreg in an autoclave, fitting precisely on the factory mounting points. With part type approval, no registration is required in Germany.\u003c\/p\u003e\n\n\u003ch2\u003ePart type approval - no registration required in Germany\u003c\/h2\u003e\n\u003cp\u003eWith part type approval, the side skirts require no registration in Germany. No inspection appointment, no individual approval under §21 StVZO (German law). That saves you time, fees and paperwork.\u003c\/p\u003e\n\n\u003ch2\u003eProvide your vehicle identification number (VIN) when ordering\u003c\/h2\u003e\n\u003cp\u003eThe part type approval is issued in your name for your vehicle identification number. You enter the VIN when ordering, we record it in our system and enclose the approval document with the delivery. Without a VIN the document cannot be issued.\u003c\/p\u003e\n\n\u003ch2\u003eHighlights\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003ePart type approval - no registration required in Germany\u003c\/li\u003e\n  \u003cli\u003eDry carbon prepreg, autoclave-cured\u003c\/li\u003e\n  \u003cli\u003eClassic 3K carbon with high-gloss UV lacquer\u003c\/li\u003e\n  \u003cli\u003eGeometry close to the original, precise fit via the factory mounting points\u003c\/li\u003e\n  \u003cli\u003e3-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMaterial\u003c\/h2\u003e\n\u003cp\u003eDry carbon prepreg, cured in an autoclave under pressure and heat. The standard finish is classic 3K carbon with high-gloss UV lacquer - UV-stable and non-yellowing.\u003c\/p\u003e\n\n\u003ch2\u003eForged carbon available on request\u003c\/h2\u003e\n\u003cp\u003eAvailable on request in a forged carbon finish. Surcharge from +25 %, made to order. Please contact FLOW DOWN® support before ordering.\u003c\/p\u003e\n\n\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for BMW M3 G80 Saloon (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M3 G81 Touring (S58, from 2022)\u003c\/li\u003e\n  \u003cli\u003eAlso suitable for: suitable for BMW M3 CS G80\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot suitable for: BMW M4 G82 \/ G83 (different side skirt profile), BMW M3 F80 (previous generation), BMW 3 Series G20 (non-M models).\u003c\/p\u003e\n\n\u003ch2\u003eBody kit and carbon parts fitting at FLOW DOWN® in Essen\u003c\/h2\u003e\n\u003cp\u003eFor years FLOW DOWN® has been a go-to address in the Ruhr region for fitting body kits and carbon parts. Because of their length and their bonding and bolting points, side skirts are a job we particularly like to handle properly in our own workshop. You can book body kit fitting directly as a service in the shop.\u003ca href=\"https:\/\/flow-down.com\/products\/bodykit-montage\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch2\u003eScope of delivery\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1× set of carbon side skirts FD Streetline (left + right)\u003c\/li\u003e\n  \u003cli\u003e1× part type approval, issued for your VIN\u003c\/li\u003e\n  \u003cli\u003e1× warranty card (3 years)\u003c\/li\u003e\n  \u003cli\u003ePackaging with edge protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRoad-legality notes\u003c\/h2\u003e\n\u003cp\u003eWith part type approval, no registration is required in Germany - no individual inspection under §21 StVZO (German law). The approval is only valid together with the registered VIN.\u003c\/p\u003e","brand":"Max Carbon","offers":[{"title":"Default Title","offer_id":58107468513544,"sku":"D-T-110","price":1449.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/B-G80-SS-DS0.jpg?v=1782670889"},{"product_id":"carbon-seitenschweller-fd-performance-passend-fur-bmw-m3-g80-g81","title":"Carbon Side skirts FD Performance suitable for BMW M3 G80 G81","description":"\u003ch1\u003eCarbon side skirts FD Performance suitable for BMW M3 G80, M3 G81 with part type approval – no registration required in Germany\u003c\/h1\u003e\n\n\u003cp\u003eCarbon side skirts FD Performance suitable for BMW M3 G80 and BMW M3 G81. The sporty, performance-oriented side skirt version - a more pronounced geometry than the Streetline and a clearly visible statement along the side. Made from dry carbon prepreg in an autoclave, fitting precisely on the factory mounting points. With part type approval, no registration is required in Germany.\u003c\/p\u003e\n\n\u003ch2\u003ePart type approval - no registration required in Germany\u003c\/h2\u003e\n\u003cp\u003eWith part type approval, the side skirts require no registration in Germany. No inspection appointment, no individual approval under §21 StVZO (German law), no registration fee.\u003c\/p\u003e\n\n\u003ch2\u003eProvide your vehicle identification number (VIN) when ordering\u003c\/h2\u003e\n\u003cp\u003eThe part type approval is issued in your name for your VIN. You enter the vehicle identification number when ordering, we record it in our system and enclose the approval document with the delivery. Without a VIN the document cannot be issued.\u003c\/p\u003e\n\n\u003ch2\u003eHighlights\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003ePart type approval - no registration required in Germany\u003c\/li\u003e\n  \u003cli\u003eDry carbon prepreg, autoclave-cured\u003c\/li\u003e\n  \u003cli\u003eClassic 3K carbon with high-gloss UV lacquer\u003c\/li\u003e\n  \u003cli\u003ePronounced sporty geometry\u003c\/li\u003e\n  \u003cli\u003e3-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMaterial\u003c\/h2\u003e\n\u003cp\u003eDry carbon prepreg, cured in an autoclave under pressure and heat - high strength, low weight, flawless visible finish. The standard is classic 3K carbon with high-gloss UV lacquer - UV-stable and non-yellowing.\u003c\/p\u003e\n\n\u003ch2\u003eForged carbon available on request\u003c\/h2\u003e\n\u003cp\u003eAvailable on request in a forged carbon finish. Surcharge from +25 %, made to order. Please contact FLOW DOWN® support before ordering.\u003c\/p\u003e\n\n\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for BMW M3 G80 Saloon (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M3 G81 Touring (S58, from 2022)\u003c\/li\u003e\n  \u003cli\u003eAlso suitable for: suitable for BMW M3 CS G80\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNot suitable for: BMW M4 G82 \/ G83 (different side skirt profile), BMW M3 F80, BMW 3 Series G20.\u003c\/p\u003e\n\n\u003ch2\u003eBody kit and carbon parts fitting at FLOW DOWN® in Essen\u003c\/h2\u003e\n\u003cp\u003eFor years FLOW DOWN® has been a go-to address in the Ruhr region for fitting body kits and carbon parts. The Performance side skirts have a more pronounced geometry and should be fitted professionally. Our own workshop in Essen, no third party. You can book body kit fitting directly as a service in the shop.\u003ca href=\"https:\/\/flow-down.com\/products\/bodykit-montage\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch2\u003eScope of delivery\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1× set of carbon side skirts FD Performance (left + right)\u003c\/li\u003e\n  \u003cli\u003e1× part type approval, issued for your VIN\u003c\/li\u003e\n  \u003cli\u003e1× warranty card (3 years)\u003c\/li\u003e\n  \u003cli\u003ePackaging with edge protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRoad-legality notes\u003c\/h2\u003e\n\u003cp\u003eWith part type approval, no registration is required in Germany - no individual inspection under §21 StVZO (German law). The approval is only valid together with the registered VIN.\u003c\/p\u003e","brand":"Max Carbon","offers":[{"title":"Default Title","offer_id":58107468546312,"sku":"D-T-089","price":1549.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/B-G80-SS-DS0_0e01f8c8-4bb5-453a-b31f-48a9f95ba847.jpg?v=1782670893"},{"product_id":"carbon-heckdiffusor-fd-trackline-passend-fur-bmw-m3-m4-g80-g81-g82-g83-inkl-lci","title":"Carbon Rear diffuser FD Trackline suitable for BMW M3 M4 G80 G81 G82 G83 inkl. LCI","description":"\u003ch1\u003eCarbon rear diffuser FD Trackline suitable for BMW M3 G80, M3 G81, M4 G82, M4 G83 incl. LCI with part type approval – no registration required in Germany\u003c\/h1\u003e\n\n\u003cp\u003eCarbon rear diffuser FD Trackline suitable for BMW M3 G80, BMW M3 G81, BMW M4 G82 and BMW M4 G83 - LCI models included. The pronounced, sporty diffuser version with a bold geometry and a clearly visible track accent at the rear. Made from dry carbon prepreg in an autoclave, fitting precisely on the factory mounting points. With part type approval, no registration is required in Germany.\u003c\/p\u003e\n\n\u003ch2\u003ePart type approval - no registration required in Germany\u003c\/h2\u003e\n\u003cp\u003eWith part type approval, the rear diffuser requires no registration in Germany. No inspection appointment, no individual approval under §21 StVZO (German law).\u003c\/p\u003e\n\n\u003ch2\u003eProvide your vehicle identification number (VIN) when ordering\u003c\/h2\u003e\n\u003cp\u003eThe part type approval is issued in your name for your vehicle identification number. You enter the VIN when ordering, we record it in our system and enclose the approval document with the delivery. Without a VIN the document cannot be issued.\u003c\/p\u003e\n\n\u003ch2\u003eHighlights\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003ePart type approval - no registration required in Germany\u003c\/li\u003e\n  \u003cli\u003eDry carbon prepreg, autoclave-cured\u003c\/li\u003e\n  \u003cli\u003eClassic 3K carbon with high-gloss UV lacquer\u003c\/li\u003e\n  \u003cli\u003eLCI models included\u003c\/li\u003e\n  \u003cli\u003e3-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMaterial\u003c\/h2\u003e\n\u003cp\u003eDry carbon prepreg, cured in an autoclave under pressure and heat. The standard is classic 3K carbon with high-gloss UV lacquer, UV-stable.\u003c\/p\u003e\n\n\u003ch2\u003eForged carbon available on request\u003c\/h2\u003e\n\u003cp\u003eAvailable on request in a forged carbon finish. Surcharge from +25 %, made to order. Please contact FLOW DOWN® support before ordering.\u003c\/p\u003e\n\n\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for BMW M3 G80 Saloon - pre-LCI + LCI (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M3 G81 Touring - pre-LCI + LCI (S58, from 2022)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M4 G82 Coupé - pre-LCI + LCI (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M4 G83 Convertible - pre-LCI + LCI (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eAlso suitable for: suitable for BMW M3 CS G80, suitable for BMW M4 CS G82, suitable for BMW M4 CSL G82\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBody kit and carbon parts fitting at FLOW DOWN® in Essen\u003c\/h2\u003e\n\u003cp\u003eFor years FLOW DOWN® has been a go-to address in the Ruhr region for fitting body kits and carbon parts. Our own workshop in Essen, no third-party subcontracting. You can book body kit fitting directly as a service in the shop.\u003ca href=\"https:\/\/flow-down.com\/products\/bodykit-montage\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch2\u003eRear number plate - neatly mounted with the magnetic rear holder\u003c\/h2\u003e\n\u003cp\u003eWith the carbon diffuser it is worth looking at the rear number plate too: our magnetic number plate holder suitable for the BMW M3 G80\/G81 and M4 G82\/G83 is fitted in seconds, holds securely and comes off in an instant for shows or photo shoots. Made in Germany, tested up to 300 km\/h.\u003ca href=\"https:\/\/flow-down.com\/products\/magnet-kennzeichenhalter-passend-fur-bmw-m3-g80-g81-m4-g82-g83\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch2\u003eScope of delivery\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1× carbon rear diffuser FD Trackline\u003c\/li\u003e\n  \u003cli\u003e1× part type approval, issued for your VIN\u003c\/li\u003e\n  \u003cli\u003e1× warranty card (3 years)\u003c\/li\u003e\n  \u003cli\u003ePackaging with edge protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRoad-legality notes\u003c\/h2\u003e\n\u003cp\u003eWith part type approval, no registration is required in Germany - no individual inspection under §21 StVZO (German law). The approval is only valid together with the registered VIN.\u003c\/p\u003e","brand":"Max Carbon","offers":[{"title":"Default Title","offer_id":58107468579080,"sku":"D-T-032","price":699.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/P-982-SP-RS-HF-K10_b40178cc-7297-4f27-ba50-3752ee5c666a_1.jpg?v=1782670899"},{"product_id":"carbon-heckdiffusor-leiste-passend-fur-bmw-m3-m4-g80-g81-g82-g83-inkl-lci","title":"Carbon Rear diffuser-Leiste suitable for BMW M3 M4 G80 G81 G82 G83 inkl. LCI","description":"\u003ch1\u003eCarbon rear diffuser blade FD Streetline suitable for BMW M3 G80, M3 G81, M4 G82, M4 G83 incl. LCI with part type approval – no registration required in Germany\u003c\/h1\u003e\n\n\u003cp\u003eCarbon rear diffuser blade FD Streetline suitable for BMW M3 G80, BMW M3 G81, BMW M4 G82 and BMW M4 G83 - LCI models included. A carbon blade as a visual upgrade on the original diffuser - a subtle accent without replacing the entire rear diffuser. Made from dry carbon prepreg in an autoclave, fitting precisely on the factory mounting points. With part type approval, no registration is required in Germany.\u003c\/p\u003e\n\n\u003ch2\u003ePart type approval - no registration required in Germany\u003c\/h2\u003e\n\u003cp\u003eWith part type approval, the diffuser blade requires no registration in Germany. No inspection appointment, no individual approval under §21 StVZO (German law).\u003c\/p\u003e\n\n\u003ch2\u003eProvide your vehicle identification number (VIN) when ordering\u003c\/h2\u003e\n\u003cp\u003eThe part type approval is issued in your name for your vehicle identification number. You enter the VIN when ordering, we record it and enclose the approval document with the delivery. Without a VIN the document cannot be issued.\u003c\/p\u003e\n\n\u003ch2\u003eHighlights\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003ePart type approval - no registration required in Germany\u003c\/li\u003e\n  \u003cli\u003eDry carbon prepreg, autoclave-cured\u003c\/li\u003e\n  \u003cli\u003eClassic 3K carbon with high-gloss UV lacquer\u003c\/li\u003e\n  \u003cli\u003eA subtle carbon accent without replacing the whole diffuser\u003c\/li\u003e\n  \u003cli\u003e3-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMaterial\u003c\/h2\u003e\n\u003cp\u003eDry carbon prepreg, autoclave-cured - high strength, low weight, flawless visible finish. The standard is classic 3K carbon with high-gloss UV lacquer, UV-stable.\u003c\/p\u003e\n\n\u003ch2\u003eForged carbon available on request\u003c\/h2\u003e\n\u003cp\u003eAvailable on request in a forged carbon finish. Surcharge from +25 %, made to order. Please contact FLOW DOWN® support before ordering.\u003c\/p\u003e\n\n\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for BMW M3 G80 Saloon - pre-LCI + LCI (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M3 G81 Touring - pre-LCI + LCI (S58, from 2022)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M4 G82 Coupé - pre-LCI + LCI (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M4 G83 Convertible - pre-LCI + LCI (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eAlso suitable for: suitable for BMW M3 CS G80, suitable for BMW M4 CS G82, suitable for BMW M4 CSL G82\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBody kit and carbon parts fitting at FLOW DOWN® in Essen\u003c\/h2\u003e\n\u003cp\u003eFor years FLOW DOWN® has been a go-to address in the Ruhr region for fitting body kits and carbon parts. Our own workshop in Essen, no third-party subcontracting. You can book body kit fitting directly as a service in the shop.\u003ca href=\"https:\/\/flow-down.com\/products\/bodykit-montage\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch2\u003eRear number plate - neatly mounted with the magnetic rear holder\u003c\/h2\u003e\n\u003cp\u003eWhile you are upgrading the rear end: our magnetic number plate holder suitable for the BMW M3 G80\/G81 and M4 G82\/G83 completes the look. Fitted in seconds, held securely, removable for shows. Made in Germany.\u003ca href=\"https:\/\/flow-down.com\/products\/magnet-kennzeichenhalter-passend-fur-bmw-m3-g80-g81-m4-g82-g83\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch2\u003eScope of delivery\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1× carbon rear diffuser blade FD Streetline\u003c\/li\u003e\n  \u003cli\u003e1× part type approval, issued for your VIN\u003c\/li\u003e\n  \u003cli\u003e1× warranty card (3 years)\u003c\/li\u003e\n  \u003cli\u003ePackaging with edge protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRoad-legality notes\u003c\/h2\u003e\n\u003cp\u003eWith part type approval, no registration is required in Germany - no individual inspection under §21 StVZO (German law). The approval is only valid together with the registered VIN.\u003c\/p\u003e","brand":"Max Carbon","offers":[{"title":"Default Title","offer_id":58107469201672,"sku":"D-T-203","price":699.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/B-G80-HW-DS4_bec50b4a-ca02-4828-8ded-b48c03a59c6c.jpg?v=1782670904"},{"product_id":"carbon-heck-winglets-fd-streetline-passend-fur-bmw-m3-m4-g80-g81-g82-g83","title":"Carbon Heck Winglets FD Streetline suitable for BMW M3 M4 G80 G81 G82 G83","description":"\u003ch1\u003eCarbon rear winglets FD Streetline suitable for BMW M3 G80, M3 G81, M4 G82, M4 G83 with part type approval – no registration required in Germany\u003c\/h1\u003e\n\n\u003cp\u003eCarbon rear winglets FD Streetline suitable for BMW M3 G80, BMW M3 G81, BMW M4 G82 and BMW M4 G83. The understated rear winglet version with a geometry close to the original - it adds a clear carbon accent at the side of the rear end without moving into race territory. Made from dry carbon prepreg in an autoclave, fitting precisely on the factory mounting points. With part type approval, no registration is required in Germany.\u003c\/p\u003e\n\n\u003ch2\u003ePart type approval - no registration required in Germany\u003c\/h2\u003e\n\u003cp\u003eWith part type approval, the rear winglets require no registration in Germany. No inspection appointment, no individual approval under §21 StVZO (German law).\u003c\/p\u003e\n\n\u003ch2\u003eProvide your vehicle identification number (VIN) when ordering\u003c\/h2\u003e\n\u003cp\u003eThe part type approval is issued in your name for your vehicle identification number. You enter the VIN when ordering, we record it and enclose the approval document with the delivery. Without a VIN the document cannot be issued.\u003c\/p\u003e\n\n\u003ch2\u003eHighlights\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003ePart type approval - no registration required in Germany\u003c\/li\u003e\n  \u003cli\u003eDry carbon prepreg, autoclave-cured\u003c\/li\u003e\n  \u003cli\u003eClassic 3K carbon with high-gloss UV lacquer\u003c\/li\u003e\n  \u003cli\u003eGeometry close to the original\u003c\/li\u003e\n  \u003cli\u003e3-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMaterial\u003c\/h2\u003e\n\u003cp\u003eDry carbon prepreg, cured in an autoclave under pressure and heat. The standard finish is classic 3K carbon with high-gloss UV lacquer - UV-stable and non-yellowing.\u003c\/p\u003e\n\n\u003ch2\u003eForged carbon available on request\u003c\/h2\u003e\n\u003cp\u003eAvailable on request in a forged carbon finish. Surcharge from +25 %, made to order. Please contact FLOW DOWN® support before ordering.\u003c\/p\u003e\n\n\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for BMW M3 G80 Saloon (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M3 G81 Touring (S58, from 2022)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M4 G82 Coupé (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M4 G83 Convertible (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eAlso suitable for: suitable for BMW M3 CS G80, suitable for BMW M4 CS G82, suitable for BMW M4 CSL G82\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBody kit and carbon parts fitting at FLOW DOWN® in Essen\u003c\/h2\u003e\n\u003cp\u003eFor years FLOW DOWN® has been a go-to address in the Ruhr region for fitting body kits and carbon parts. Our own workshop in Essen, no third-party subcontracting. You can book body kit fitting directly as a service in the shop.\u003ca href=\"https:\/\/flow-down.com\/products\/bodykit-montage\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch2\u003eScope of delivery\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1× set of carbon rear winglets FD Streetline (left + right)\u003c\/li\u003e\n  \u003cli\u003e1× part type approval, issued for your VIN\u003c\/li\u003e\n  \u003cli\u003e1× warranty card (3 years)\u003c\/li\u003e\n  \u003cli\u003ePackaging with edge protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRoad-legality notes\u003c\/h2\u003e\n\u003cp\u003eWith part type approval, no registration is required in Germany - no individual inspection under §21 StVZO (German law). The approval is only valid together with the registered VIN.\u003c\/p\u003e","brand":"Max Carbon","offers":[{"title":"M3 G80 G81","offer_id":58107469299976,"sku":"D-T-132","price":649.99,"currency_code":"EUR","in_stock":true},{"title":"M4 G82 G83","offer_id":58107469332744,"sku":"D-T-097","price":649.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/B-G80-HW-DS1_8ca2d824-8d21-4d3b-b9d2-85cf288109a8.jpg?v=1782670909"},{"product_id":"carbon-heck-winglets-fd-performance-passend-fur-bmw-m3-m4-g80-g81-g82-g83","title":"Carbon Heck Winglets FD Performance suitable for BMW M3 M4 G80 G81 G82 G83","description":"\u003ch1\u003eCarbon rear winglets FD Performance suitable for BMW M3 G80, M3 G81, M4 G82, M4 G83 with part type approval – no registration required in Germany\u003c\/h1\u003e\n\n\u003cp\u003eCarbon rear winglets FD Performance suitable for BMW M3 G80, BMW M3 G81, BMW M4 G82 and BMW M4 G83. The more pronounced, sportier winglet version with a bold geometry - a clear statement at the rear. Made from dry carbon prepreg in an autoclave, fitting precisely on the factory mounting points. With part type approval, no registration is required in Germany.\u003c\/p\u003e\n\n\u003ch2\u003ePart type approval - no registration required in Germany\u003c\/h2\u003e\n\u003cp\u003eWith part type approval, the rear winglets require no registration in Germany. No inspection appointment, no individual approval under §21 StVZO (German law).\u003c\/p\u003e\n\n\u003ch2\u003eProvide your vehicle identification number (VIN) when ordering\u003c\/h2\u003e\n\u003cp\u003eThe part type approval is issued in your name for your vehicle identification number. You enter the VIN when ordering, we record it and enclose the approval document with the delivery. Without a VIN the document cannot be issued.\u003c\/p\u003e\n\n\u003ch2\u003eHighlights\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003ePart type approval - no registration required in Germany\u003c\/li\u003e\n  \u003cli\u003eDry carbon prepreg, autoclave-cured\u003c\/li\u003e\n  \u003cli\u003eClassic 3K carbon with high-gloss UV lacquer\u003c\/li\u003e\n  \u003cli\u003ePronounced sporty geometry\u003c\/li\u003e\n  \u003cli\u003e3-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMaterial\u003c\/h2\u003e\n\u003cp\u003eDry carbon prepreg, autoclave-cured - high strength, low weight, flawless visible finish. The standard is classic 3K carbon with high-gloss UV lacquer, UV-stable.\u003c\/p\u003e\n\n\u003ch2\u003eForged carbon available on request\u003c\/h2\u003e\n\u003cp\u003eAvailable on request in a forged carbon finish. Surcharge from +25 %, made to order. Please contact FLOW DOWN® support before ordering.\u003c\/p\u003e\n\n\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for BMW M3 G80 Saloon (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M3 G81 Touring (S58, from 2022)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M4 G82 Coupé (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M4 G83 Convertible (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eAlso suitable for: suitable for BMW M3 CS G80, suitable for BMW M4 CS G82, suitable for BMW M4 CSL G82\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBody kit and carbon parts fitting at FLOW DOWN® in Essen\u003c\/h2\u003e\n\u003cp\u003eFor years FLOW DOWN® has been a go-to address in the Ruhr region for fitting body kits and carbon parts. Our own workshop in Essen, no third-party subcontracting. You can book body kit fitting directly as a service in the shop.\u003ca href=\"https:\/\/flow-down.com\/products\/bodykit-montage\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch2\u003eScope of delivery\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1× set of carbon rear winglets FD Performance (left + right)\u003c\/li\u003e\n  \u003cli\u003e1× part type approval, issued for your VIN\u003c\/li\u003e\n  \u003cli\u003e1× warranty card (3 years)\u003c\/li\u003e\n  \u003cli\u003ePackaging with edge protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRoad-legality notes\u003c\/h2\u003e\n\u003cp\u003eWith part type approval, no registration is required in Germany - no individual inspection under §21 StVZO (German law). The approval is only valid together with the registered VIN.\u003c\/p\u003e","brand":"Max Carbon","offers":[{"title":"M3 G80 G81","offer_id":58107469463816,"sku":"D-T-121","price":699.99,"currency_code":"EUR","in_stock":true},{"title":"M4 G82 G83","offer_id":58107469496584,"sku":"D-T-122","price":699.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/B-G80-HW-DS10_9344f1a9-2af4-4ce5-adc9-ebf55417c8ac.jpg?v=1782670911"},{"product_id":"carbon-heckdiffusor-fd-performance-passend-fur-bmw-m3-m4-g80-g81-g82-g83-inkl-lci","title":"Carbon Rear diffuser FD Performance suitable for BMW M3 M4 G80 G81 G82 G83 inkl. LCI","description":"\u003ch1\u003eCarbon rear diffuser FD Performance suitable for BMW M3 G80, M3 G81, M4 G82, M4 G83 incl. LCI with part type approval – no registration required in Germany\u003c\/h1\u003e\n\n\u003cp\u003eCarbon rear diffuser FD Performance suitable for BMW M3 G80, BMW M3 G81, BMW M4 G82 and BMW M4 G83 - LCI models included. The most pronounced diffuser version in our FD range - bold geometry and a clear statement look at the rear. Made from dry carbon prepreg in an autoclave, fitting precisely on the factory mounting points. With part type approval, no registration is required in Germany.\u003c\/p\u003e\n\n\u003ch2\u003ePart type approval - no registration required in Germany\u003c\/h2\u003e\n\u003cp\u003eWith part type approval, the rear diffuser requires no registration in Germany. No inspection appointment, no individual approval under §21 StVZO (German law), no registration fee.\u003c\/p\u003e\n\n\u003ch2\u003eProvide your vehicle identification number (VIN) when ordering\u003c\/h2\u003e\n\u003cp\u003eThe part type approval is issued in your name for your vehicle identification number. You enter the VIN when ordering, we record it and enclose the approval document with the delivery. Without a VIN the document cannot be issued.\u003c\/p\u003e\n\n\u003ch2\u003eHighlights\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003ePart type approval - no registration required in Germany\u003c\/li\u003e\n  \u003cli\u003eDry carbon prepreg, autoclave-cured\u003c\/li\u003e\n  \u003cli\u003eClassic 3K carbon with high-gloss UV lacquer\u003c\/li\u003e\n  \u003cli\u003eBold geometry, a clear statement look\u003c\/li\u003e\n  \u003cli\u003e3-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMaterial\u003c\/h2\u003e\n\u003cp\u003eDry carbon prepreg, autoclave-cured. The standard is classic 3K carbon with high-gloss UV lacquer, UV-stable.\u003c\/p\u003e\n\n\u003ch2\u003eForged carbon available on request\u003c\/h2\u003e\n\u003cp\u003eAvailable on request in a forged carbon finish. Surcharge from +25 %, made to order. Please contact FLOW DOWN® support before ordering.\u003c\/p\u003e\n\n\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for BMW M3 G80 Saloon - pre-LCI + LCI (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M3 G81 Touring - pre-LCI + LCI (S58, from 2022)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M4 G82 Coupé - pre-LCI + LCI (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M4 G83 Convertible - pre-LCI + LCI (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eAlso suitable for: suitable for BMW M3 CS G80, suitable for BMW M4 CS G82, suitable for BMW M4 CSL G82\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBody kit and carbon parts fitting at FLOW DOWN® in Essen\u003c\/h2\u003e\n\u003cp\u003eFor years FLOW DOWN® has been a go-to address in the Ruhr region for fitting body kits and carbon parts. Our own workshop in Essen, no third-party subcontracting. You can book body kit fitting directly as a service in the shop.\u003ca href=\"https:\/\/flow-down.com\/products\/bodykit-montage\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch2\u003eRear number plate - neatly mounted with the magnetic rear holder\u003c\/h2\u003e\n\u003cp\u003eTo keep the rear-end setup coherent, we recommend our magnetic number plate holder suitable for the BMW M3 G80\/G81 and M4 G82\/G83. Fitted in seconds, holds securely, removable for shoots or shows. Made in Germany.\u003ca href=\"https:\/\/flow-down.com\/products\/magnet-kennzeichenhalter-passend-fur-bmw-m3-g80-g81-m4-g82-g83\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch2\u003eScope of delivery\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1× carbon rear diffuser FD Performance\u003c\/li\u003e\n  \u003cli\u003e1× part type approval, issued for your VIN\u003c\/li\u003e\n  \u003cli\u003e1× warranty card (3 years)\u003c\/li\u003e\n  \u003cli\u003ePackaging with edge protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRoad-legality notes\u003c\/h2\u003e\n\u003cp\u003eWith part type approval, no registration is required in Germany - no individual inspection under §21 StVZO (German law). The approval is only valid together with the registered VIN.\u003c\/p\u003e","brand":"Max Carbon","offers":[{"title":"Default Title","offer_id":58107469627656,"sku":"D-T-143","price":699.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/P-982-SP-RS-HF-K8_37f35237-fedb-462c-a77a-9c01c75eb536.jpg?v=1782670915"},{"product_id":"carbon-front-canards-fd-performance-passend-fur-bmw-m3-m4-g80-g81-g82-g83","title":"Carbon Front canards FD Performance suitable for BMW M3 M4 G80 G81 G82 G83","description":"\u003ch1\u003eCarbon front canards FD Performance suitable for BMW M3 G80, M3 G81, M4 G82, M4 G83 with part type approval – no registration required in Germany\u003c\/h1\u003e\n\n\u003cp\u003eCarbon front canards FD Performance suitable for BMW M3 G80, BMW M3 G81, BMW M4 G82 and BMW M4 G83. The most pronounced canard version in our FD range - bold geometry, a clearly visible race accent. Made from dry carbon prepreg in an autoclave, fitting precisely on the factory mounting points. With part type approval, no registration is required in Germany.\u003c\/p\u003e\n\n\u003ch2\u003ePart type approval - no registration required in Germany\u003c\/h2\u003e\n\u003cp\u003eWith part type approval, the canards require no registration in Germany. No inspection appointment, no individual approval under §21 StVZO (German law), no registration fee.\u003c\/p\u003e\n\n\u003ch2\u003eProvide your vehicle identification number (VIN) when ordering\u003c\/h2\u003e\n\u003cp\u003eThe part type approval is issued in your name for your vehicle identification number (VIN). You enter the VIN when ordering, we record it in our system and enclose the approval document with the delivery. Without a VIN the document cannot be issued.\u003c\/p\u003e\n\n\u003ch2\u003eHighlights\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003ePart type approval - no registration required in Germany\u003c\/li\u003e\n  \u003cli\u003eDry carbon prepreg, autoclave-cured\u003c\/li\u003e\n  \u003cli\u003eClassic 3K carbon with high-gloss UV lacquer\u003c\/li\u003e\n  \u003cli\u003eBold geometry, a clear race accent\u003c\/li\u003e\n  \u003cli\u003e3-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMaterial\u003c\/h2\u003e\n\u003cp\u003eDry carbon prepreg, cured in an autoclave under pressure and heat. The standard is classic 3K carbon with high-gloss UV lacquer - UV-stable and non-yellowing.\u003c\/p\u003e\n\n\u003ch2\u003eForged carbon available on request\u003c\/h2\u003e\n\u003cp\u003eAvailable on request in a forged carbon finish. Surcharge from +25 %, made to order. Please contact FLOW DOWN® support before ordering.\u003c\/p\u003e\n\n\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for BMW M3 G80 Saloon (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M3 G81 Touring (S58, from 2022)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M4 G82 Coupé (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M4 G83 Convertible (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eAlso suitable for: suitable for BMW M3 CS G80, suitable for BMW M4 CS G82, suitable for BMW M4 CSL G82\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBody kit and carbon parts fitting at FLOW DOWN® in Essen\u003c\/h2\u003e\n\u003cp\u003eFor years FLOW DOWN® has been a go-to address in the Ruhr region for fitting body kits and carbon parts. Our own workshop in Essen, no third-party subcontracting. You can book body kit fitting directly as a service in the shop.\u003ca href=\"https:\/\/flow-down.com\/products\/bodykit-montage\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch2\u003eScope of delivery\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1× set of carbon front canards FD Performance (left + right)\u003c\/li\u003e\n  \u003cli\u003e1× part type approval, issued for your VIN\u003c\/li\u003e\n  \u003cli\u003e1× warranty card (3 years)\u003c\/li\u003e\n  \u003cli\u003ePackaging with edge protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRoad-legality notes\u003c\/h2\u003e\n\u003cp\u003eWith part type approval, no registration is required in Germany - no individual inspection under §21 StVZO (German law). The approval is only valid together with the registered VIN.\u003c\/p\u003e","brand":"Max Carbon","offers":[{"title":"Default Title","offer_id":58107470348552,"sku":"D-T-080+mp+vonre","price":369.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/IMG_1325_1.jpg?v=1782670945"},{"product_id":"carbon-kuhlergrill-nieren-fd-aeroline-passend-fur-bmw-m3-m4-g80-g81-g82-g83","title":"Carbon Radiator grille Nieren FD Aeroline suitable for BMW M3 M4 G80 G81 G82 G83","description":"\u003ch1\u003eCarbon kidney grille FD Aeroline suitable for BMW M3 M4 G80 G81 G82 G83\u003c\/h1\u003e\n\n\u003cp\u003eCarbon kidney grille FD Aeroline suitable for BMW M3 G80, BMW M3 G81, BMW M4 G82 and BMW M4 G83. A race-oriented geometry as a nod to the CSL factory grille - a closed look with no colour accents, a pure carbon statement at the front. Made from dry carbon prepreg in an autoclave, it completely replaces the factory plastic kidney grilles.\u003c\/p\u003e\n\n\u003ch2\u003eRoad legality - material certificate, part type approval in preparation\u003c\/h2\u003e\n\u003cp\u003eA material certificate is currently available for this carbon kidney grille. Individual approval under §21 StVZO (German law) by an inspection body (TÜV, GTÜ or DEKRA) is required before the vehicle may be driven on public roads. A part type approval is being prepared at the KBA (German federal motor transport authority) - once it is in place no registration is needed.\u003c\/p\u003e\n\n\u003ch2\u003eHighlights\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial certificate for individual approval under §21 StVZO (German law)\u003c\/li\u003e\n  \u003cli\u003ePart type approval being prepared at the KBA - can be applied for retrospectively\u003c\/li\u003e\n  \u003cli\u003eRace-oriented geometry, closed look\u003c\/li\u003e\n  \u003cli\u003eDry carbon prepreg, autoclave-cured\u003c\/li\u003e\n  \u003cli\u003e3-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMaterial\u003c\/h2\u003e\n\u003cp\u003eDry carbon prepreg, cured in an autoclave under pressure and heat. The standard finish is classic 3K carbon with high-gloss UV lacquer - UV-stable and non-yellowing.\u003c\/p\u003e\n\n\u003ch2\u003eForged carbon available on request\u003c\/h2\u003e\n\u003cp\u003eAvailable on request in a forged carbon finish. Surcharge from +25 %, made to order. Please contact FLOW DOWN® support before ordering.\u003c\/p\u003e\n\n\u003ch2\u003eFitting - factory replacement from behind\u003c\/h2\u003e\n\u003cp\u003eLike the original grille, this carbon grille is inserted into the bumper from behind - the factory plastic kidney grilles are completely replaced. The bumper has to be removed for fitting. We recommend professional fitting at FLOW DOWN® in Essen.\u003c\/p\u003e\n\n\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for BMW M3 G80 Saloon (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M3 G81 Touring (S58, from 2022)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M4 G82 Coupé (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M4 G83 Convertible (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eAlso suitable for: suitable for BMW M3 CS G80, suitable for BMW M4 CS G82, suitable for BMW M4 CSL G82\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBody kit and carbon parts fitting at FLOW DOWN® in Essen\u003c\/h2\u003e\n\u003cp\u003eFor years FLOW DOWN® has been a go-to address in the Ruhr region for fitting body kits and carbon parts. Our own workshop in Essen, no third-party subcontracting. You can book body kit fitting directly as a service in the shop - and on request we also present the car at the inspection body for the individual approval under §21.\u003ca href=\"https:\/\/flow-down.com\/products\/bodykit-montage\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch2\u003eFront number plate - neatly mounted with the hook-and-loop holder\u003c\/h2\u003e\n\u003cp\u003eWith a carbon kidney grille we recommend the FLOW DOWN® hook-and-loop number plate holder. No drilling into the carbon grille, no magnet on the carbon surface - the plate is held by hook-and-loop tape and can be removed whenever you need.\u003ca href=\"https:\/\/flow-down.com\/products\/flow-down-klett-kennzeichenhalter\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch2\u003eScope of delivery\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1× carbon kidney grille FD Aeroline (factory replacement)\u003c\/li\u003e\n  \u003cli\u003e1× material certificate for individual approval under §21\u003c\/li\u003e\n  \u003cli\u003e1× warranty card (3 years)\u003c\/li\u003e\n  \u003cli\u003ePackaging with edge protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRoad-legality notes\u003c\/h2\u003e\n\u003cp\u003eAt present: individual approval under §21 StVZO (German law) at an inspection body is required. The enclosed material certificate is the basis for that inspection. As soon as the part type approval has been granted by the KBA (German federal motor transport authority) you can apply for it retrospectively.\u003c\/p\u003e","brand":"Max Carbon","offers":[{"title":"Without adaptive cruise control","offer_id":58107470446856,"sku":"D-T-177","price":1149.0,"currency_code":"EUR","in_stock":true},{"title":"With adaptive cruise control","offer_id":58107470479624,"sku":"D-T-182","price":1149.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/B-G87-KG-ONE-Y3.jpg?v=1782670950"},{"product_id":"carbon-kuhlergrill-nieren-fd-performance-passend-fur-bmw-m3-m4-g80-g81-g82-g83","title":"Carbon Radiator grille Nieren FD Performance suitable for BMW M3 M4 G80 G81 G82 G83","description":"\u003ch1\u003eCarbon kidney grille FD Performance suitable for BMW M3 M4 G80 G81 G82 G83\u003c\/h1\u003e\n\n\u003cp\u003eCarbon kidney grille FD Performance suitable for BMW M3 G80, BMW M3 G81, BMW M4 G82 and BMW M4 G83. A design of its own, with a distinctive X-shaped lattice - not a one-to-one copy of a factory design but a separate design language with clear recognition value. Made from dry carbon prepreg in an autoclave, fitted from the outside over the factory kidney grilles.\u003c\/p\u003e\n\n\u003ch2\u003eRoad legality - material certificate, part type approval in preparation\u003c\/h2\u003e\n\u003cp\u003eA material certificate is currently available for this carbon kidney grille. Individual approval under §21 StVZO (German law) by an inspection body (TÜV, GTÜ or DEKRA) is required before the vehicle may be driven on public roads. A part type approval is being prepared at the KBA (German federal motor transport authority).\u003c\/p\u003e\n\n\u003ch2\u003eHighlights\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial certificate for individual approval under §21 StVZO (German law)\u003c\/li\u003e\n  \u003cli\u003ePart type approval being prepared at the KBA - can be applied for retrospectively\u003c\/li\u003e\n  \u003cli\u003eA distinctive X design - not a copy of the factory part\u003c\/li\u003e\n  \u003cli\u003eDry carbon prepreg, autoclave-cured\u003c\/li\u003e\n  \u003cli\u003e3-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMaterial\u003c\/h2\u003e\n\u003cp\u003eDry carbon prepreg, cured in an autoclave under pressure and heat. The standard is classic 3K carbon with high-gloss UV lacquer - UV-stable and non-yellowing.\u003c\/p\u003e\n\n\u003ch2\u003eForged carbon available on request\u003c\/h2\u003e\n\u003cp\u003eAvailable on request in a forged carbon finish. Surcharge from +25 %, made to order. Please contact FLOW DOWN® support before ordering.\u003c\/p\u003e\n\n\u003ch2\u003eFitting - overlay from the outside\u003c\/h2\u003e\n\u003cp\u003eUnlike a factory replacement grille, the X-design element is fitted from the outside over the factory kidney grilles. The original grille stays completely in place and the carbon X sits visibly on top. The advantage: reversible fitting without removing the bumper.\u003c\/p\u003e\n\n\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for BMW M3 G80 Saloon (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M3 G81 Touring (S58, from 2022)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M4 G82 Coupé (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M4 G83 Convertible (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eAlso suitable for: suitable for BMW M3 CS G80, suitable for BMW M4 CS G82, suitable for BMW M4 CSL G82\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBody kit and carbon parts fitting at FLOW DOWN® in Essen\u003c\/h2\u003e\n\u003cp\u003eFor years FLOW DOWN® has been a go-to address in the Ruhr region for fitting body kits and carbon parts. Our own workshop in Essen, no third-party subcontracting. You can book body kit fitting directly as a service in the shop.\u003ca href=\"https:\/\/flow-down.com\/products\/bodykit-montage\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch2\u003eFront number plate - neatly mounted with the hook-and-loop holder\u003c\/h2\u003e\n\u003cp\u003eWith a carbon kidney grille we recommend the FLOW DOWN® hook-and-loop number plate holder. No drilling into the carbon grille, no magnet on the carbon surface - the plate is held by hook-and-loop tape and can be removed whenever you need.\u003ca href=\"https:\/\/flow-down.com\/products\/flow-down-klett-kennzeichenhalter\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch2\u003eScope of delivery\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1× carbon kidney grille FD Performance (X-design overlay)\u003c\/li\u003e\n  \u003cli\u003e1× material certificate for individual approval under §21\u003c\/li\u003e\n  \u003cli\u003e1× warranty card (3 years)\u003c\/li\u003e\n  \u003cli\u003ePackaging with edge protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRoad-legality notes\u003c\/h2\u003e\n\u003cp\u003eAt present: individual approval under §21 StVZO (German law) at an inspection body is required. The enclosed material certificate is the basis for that inspection. As soon as the part type approval has been granted by the KBA (German federal motor transport authority) you can apply for it retrospectively.\u003c\/p\u003e","brand":"Max Carbon","offers":[{"title":"Without adaptive cruise control","offer_id":58107470512392,"sku":"MC-FG-G8X-V3","price":1199.99,"currency_code":"EUR","in_stock":true},{"title":"With adaptive cruise control","offer_id":58107470545160,"sku":"MC-FG-G8X-V3-ACC","price":1199.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/DSC04631.png?v=1782670952"},{"product_id":"carbon-kuhlergrill-nieren-fd-streetline-grill-geschlossen-passend-fur-bmw-m3-m4-g80-g81-g82-g83","title":"Carbon Radiator grille Nieren FD Streetline (Grill geschlossen) suitable for BMW M3 M4 G80 G81 G82 G83","description":"\u003ch1\u003eCarbon kidney grille FD Streetline (closed grille) suitable for BMW M3 M4 G80 G81 G82 G83\u003c\/h1\u003e\n\n\u003cp\u003eCarbon kidney grille FD Streetline in the closed version, suitable for BMW M3 G80, BMW M3 G81, BMW M4 G82 and BMW M4 G83. With carbon braces at both the top and the bottom - additional cross-braces break up the large kidney openings and give the grille a more compact, closed appearance. Made from dry carbon prepreg in an autoclave, a factory replacement fitted from behind.\u003c\/p\u003e\n\n\u003ch2\u003eRoad legality - material certificate, part type approval in preparation\u003c\/h2\u003e\n\u003cp\u003eA material certificate is currently available for this carbon kidney grille. Individual approval under §21 StVZO (German law) by an inspection body (TÜV, GTÜ or DEKRA) is required before the vehicle may be driven on public roads. A part type approval is being prepared at the KBA (German federal motor transport authority).\u003c\/p\u003e\n\n\u003ch2\u003eHighlights\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial certificate for individual approval under §21 StVZO (German law)\u003c\/li\u003e\n  \u003cli\u003ePart type approval being prepared at the KBA - can be applied for retrospectively\u003c\/li\u003e\n  \u003cli\u003eClosed grille with carbon braces at the top and bottom\u003c\/li\u003e\n  \u003cli\u003eDry carbon prepreg, autoclave-cured\u003c\/li\u003e\n  \u003cli\u003e3-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMaterial\u003c\/h2\u003e\n\u003cp\u003eDry carbon prepreg, cured in an autoclave under pressure and heat. The standard finish is classic 3K carbon with high-gloss UV lacquer - UV-stable and non-yellowing.\u003c\/p\u003e\n\n\u003ch2\u003eForged carbon available on request\u003c\/h2\u003e\n\u003cp\u003eAvailable on request in a forged carbon finish. Surcharge from +25 %, made to order. Please contact FLOW DOWN® support before ordering.\u003c\/p\u003e\n\n\u003ch2\u003eFitting - factory replacement with bumper removal\u003c\/h2\u003e\n\u003cp\u003eLike the original grille, this carbon grille is inserted into the bumper from behind. The bumper has to be removed for fitting. In return the carbon grille then sits just like the factory part - flush, with no visible overlay. We recommend professional fitting at FLOW DOWN® in Essen.\u003c\/p\u003e\n\n\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for BMW M3 G80 Saloon (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M3 G81 Touring (S58, from 2022)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M4 G82 Coupé (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M4 G83 Convertible (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eAlso suitable for: suitable for BMW M3 CS G80, suitable for BMW M4 CS G82, suitable for BMW M4 CSL G82\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBody kit and carbon parts fitting at FLOW DOWN® in Essen\u003c\/h2\u003e\n\u003cp\u003eFor years FLOW DOWN® has been a go-to address in the Ruhr region for fitting body kits and carbon parts. Our own workshop in Essen, no third-party subcontracting. Removing the bumper, swapping the grille and fitting everything precisely - we do all of that at FLOW DOWN® in a single appointment. You can book body kit fitting directly as a service in the shop.\u003ca href=\"https:\/\/flow-down.com\/products\/bodykit-montage\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch2\u003eFront number plate - neatly mounted with the hook-and-loop holder\u003c\/h2\u003e\n\u003cp\u003eWith a carbon kidney grille we recommend the FLOW DOWN® hook-and-loop number plate holder. No drilling into the carbon grille, no magnet on the carbon surface - the plate is held by hook-and-loop tape and can be removed whenever you need.\u003ca href=\"https:\/\/flow-down.com\/products\/flow-down-klett-kennzeichenhalter\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch2\u003eScope of delivery\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1× carbon kidney grille FD Streetline (closed version, factory replacement)\u003c\/li\u003e\n  \u003cli\u003e1× material certificate for individual approval under §21\u003c\/li\u003e\n  \u003cli\u003e1× warranty card (3 years)\u003c\/li\u003e\n  \u003cli\u003ePackaging with edge protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRoad-legality notes\u003c\/h2\u003e\n\u003cp\u003eAt present: individual approval under §21 StVZO (German law) at an inspection body is required. The enclosed material certificate is the basis for that inspection. As soon as the part type approval has been granted by the KBA (German federal motor transport authority) you can apply for it retrospectively.\u003c\/p\u003e","brand":"Max Carbon","offers":[{"title":"Without adaptive cruise control","offer_id":58107470643464,"sku":"GA-G80-KG-ST","price":1199.0,"currency_code":"EUR","in_stock":true},{"title":"With adaptive cruise control","offer_id":58107470676232,"sku":"GA-G80-KG-ST-ACC","price":1199.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/IMG_7858_1.jpg?v=1782670955"},{"product_id":"carbon-kuhlergrill-nieren-fd-streetline-grill-unten-offen-passend-fur-bmw-m3-m4-g80-g81-g82-g83","title":"Carbon Radiator grille Nieren FD Streetline (Grill unten offen) suitable for BMW M3 M4 G80 G81 G82 G83","description":"\u003ch1\u003eCarbon kidney grille FD Streetline (grille open at the bottom) suitable for BMW M3 M4 G80 G81 G82 G83\u003c\/h1\u003e\n\n\u003cp\u003eCarbon kidney grille FD Streetline in the open-bottom version, suitable for BMW M3 G80, BMW M3 G81, BMW M4 G82 and BMW M4 G83. With a carbon cross-brace at the top and none at the bottom - the large kidney openings stay open at the bottom and make the grille look larger. Made from dry carbon prepreg in an autoclave, a factory replacement that is easy to fit.\u003c\/p\u003e\n\n\u003ch2\u003eRoad legality - material certificate, part type approval in preparation\u003c\/h2\u003e\n\u003cp\u003eA material certificate is currently available for this carbon kidney grille. Individual approval under §21 StVZO (German law) by an inspection body (TÜV, GTÜ or DEKRA) is required before the vehicle may be driven on public roads. A part type approval is being prepared at the KBA (German federal motor transport authority).\u003c\/p\u003e\n\n\u003ch2\u003eHighlights\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial certificate for individual approval under §21 StVZO (German law)\u003c\/li\u003e\n  \u003cli\u003ePart type approval being prepared at the KBA - can be applied for retrospectively\u003c\/li\u003e\n  \u003cli\u003eGrille open at the bottom - a bigger visual presence\u003c\/li\u003e\n  \u003cli\u003eDry carbon prepreg, autoclave-cured\u003c\/li\u003e\n  \u003cli\u003e3-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMaterial\u003c\/h2\u003e\n\u003cp\u003eDry carbon prepreg, autoclave-cured. The standard is classic 3K carbon with high-gloss UV lacquer - UV-stable and non-yellowing.\u003c\/p\u003e\n\n\u003ch2\u003eForged carbon available on request\u003c\/h2\u003e\n\u003cp\u003eAvailable on request in a forged carbon finish. Surcharge from +25 %, made to order. Please contact FLOW DOWN® support before ordering.\u003c\/p\u003e\n\n\u003ch2\u003eFitting - easy factory replacement from behind\u003c\/h2\u003e\n\u003cp\u003eLike the original grille, this carbon grille is inserted into the bumper from behind. Unlike the closed FD Streetline version, fitting is easier here - the bumper does not have to be removed completely. With a little practical skill it is easy to do yourself. Even so, we recommend having it fitted properly at FLOW DOWN® in Essen.\u003c\/p\u003e\n\n\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for BMW M3 G80 Saloon (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M3 G81 Touring (S58, from 2022)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M4 G82 Coupé (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M4 G83 Convertible (S58, from 2021)\u003c\/li\u003e\n  \u003cli\u003eAlso suitable for: suitable for BMW M3 CS G80, suitable for BMW M4 CS G82, suitable for BMW M4 CSL G82\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBody kit and carbon parts fitting at FLOW DOWN® in Essen\u003c\/h2\u003e\n\u003cp\u003eFor years FLOW DOWN® has been a go-to address in the Ruhr region for fitting body kits and carbon parts. Our own workshop in Essen, no third-party subcontracting. You can book body kit fitting directly as a service in the shop.\u003ca href=\"https:\/\/flow-down.com\/products\/bodykit-montage\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch2\u003eFront number plate - neatly mounted with the hook-and-loop holder\u003c\/h2\u003e\n\u003cp\u003eWith a carbon kidney grille we recommend the FLOW DOWN® hook-and-loop number plate holder. No drilling into the carbon grille, no magnet on the carbon surface - the plate is held by hook-and-loop tape and can be removed whenever you need.\u003ca href=\"https:\/\/flow-down.com\/products\/flow-down-klett-kennzeichenhalter\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch2\u003eScope of delivery\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1× carbon kidney grille FD Streetline (open-bottom version, factory replacement)\u003c\/li\u003e\n  \u003cli\u003e1× material certificate for individual approval under §21\u003c\/li\u003e\n  \u003cli\u003e1× warranty card (3 years)\u003c\/li\u003e\n  \u003cli\u003ePackaging with edge protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRoad-legality notes\u003c\/h2\u003e\n\u003cp\u003eAt present: individual approval under §21 StVZO (German law) at an inspection body is required. The enclosed material certificate is the basis for that inspection. As soon as the part type approval has been granted by the KBA (German federal motor transport authority) you can apply for it retrospectively.\u003c\/p\u003e","brand":"Max Carbon","offers":[{"title":"Standard - without","offer_id":58107470774536,"sku":"AT-G80-07","price":1199.0,"currency_code":"EUR","in_stock":true},{"title":"With mesh","offer_id":58107470807304,"sku":"AT-G80-09","price":1299.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/IMG_7857_1.jpg?v=1782670960"},{"product_id":"carbon-kuhlergrill-nieren-mit-roten-akzenten-passend-fur-bmw-m3-m4-cs-csl-g80-g81-g82-g83","title":"Carbon Radiator grille Nieren with roten Akzenten suitable for BMW M3 M4 CS CSL G80 G81 G82 G83","description":"\u003ch1\u003eCarbon kidney grille with red accents suitable for BMW M3 M4 CS CSL G80 G81 G82 G83\u003c\/h1\u003e\n\n\u003cp\u003eCarbon kidney grille with red accents suitable for BMW M3 CS G80, BMW M4 CS G82 and BMW M4 CSL G82. A race-oriented nod to the factory design of the CS and CSL special editions - a closed carbon geometry with red painted details that pick up exactly the look of the factory red accents. Made from dry carbon prepreg in an autoclave. Technically the grille also fits the regular M3 G80, M3 G81, M4 G82 and M4 G83 - so if you want that look on your M3 or M4, this is the one.\u003c\/p\u003e\n\n\u003ch2\u003eRoad legality - material certificate, part type approval in preparation\u003c\/h2\u003e\n\u003cp\u003eA material certificate is currently available for this carbon kidney grille. Individual approval under §21 StVZO (German law) by an inspection body (TÜV, GTÜ or DEKRA) is required before the vehicle may be driven on public roads. A part type approval is being prepared at the KBA (German federal motor transport authority).\u003c\/p\u003e\n\n\u003ch2\u003eHighlights\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial certificate for individual approval under §21 StVZO (German law)\u003c\/li\u003e\n  \u003cli\u003ePart type approval being prepared at the KBA - can be applied for retrospectively\u003c\/li\u003e\n  \u003cli\u003eRed painted accents - a look suitable for the CS and CSL special editions\u003c\/li\u003e\n  \u003cli\u003eDry carbon prepreg, autoclave-cured\u003c\/li\u003e\n  \u003cli\u003e3-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eMaterial\u003c\/h2\u003e\n\u003cp\u003eDry carbon prepreg, cured in an autoclave under pressure and heat. The standard is classic 3K carbon with high-gloss UV lacquer - UV-stable and non-yellowing. The red accents are applied by German specialist painters and integrated into the clear coat so that they are permanently protected against yellowing and peeling.\u003c\/p\u003e\n\n\u003ch2\u003eForged carbon available on request\u003c\/h2\u003e\n\u003cp\u003eAvailable on request in a forged carbon finish with red accents. Surcharge from +25 %, made to order. Please contact FLOW DOWN® support before ordering.\u003c\/p\u003e\n\n\u003ch2\u003eFitting - factory replacement from behind\u003c\/h2\u003e\n\u003cp\u003eLike the original part, the grille is inserted into the bumper from behind - which means the bumper has to be removed. In return, the carbon grille then sits flush in the bumper, with no visible overlay. We recommend professional fitting at FLOW DOWN® in Essen.\u003c\/p\u003e\n\n\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eSuitable for BMW M3 CS G80 Saloon (S58, special edition)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M4 CS G82 Coupé (S58, special edition)\u003c\/li\u003e\n  \u003cli\u003eSuitable for BMW M4 CSL G82 Coupé (S58, special edition)\u003c\/li\u003e\n  \u003cli\u003eTechnically also suitable for: suitable for BMW M3 G80, BMW M3 G81, BMW M4 G82, BMW M4 G83 - if you want the CS\/CSL look\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eBody kit and carbon parts fitting at FLOW DOWN® in Essen\u003c\/h2\u003e\n\u003cp\u003eFor years FLOW DOWN® has been a go-to address in the Ruhr region for fitting body kits and carbon parts. Our own workshop in Essen, no third-party subcontracting. Removing the bumper, swapping the grille and fitting everything precisely - we do all of that at FLOW DOWN® in a single appointment. You can book body kit fitting directly as a service in the shop.\u003ca href=\"https:\/\/flow-down.com\/products\/bodykit-montage\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch2\u003eFront number plate - neatly mounted with the hook-and-loop holder\u003c\/h2\u003e\n\u003cp\u003eWith a carbon kidney grille we recommend the FLOW DOWN® hook-and-loop number plate holder. No drilling into the carbon grille, no magnet on the carbon surface - the plate is held by hook-and-loop tape and can be removed whenever you need.\u003ca href=\"https:\/\/flow-down.com\/products\/flow-down-klett-kennzeichenhalter\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch2\u003eScope of delivery\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e1× carbon kidney grille with red accents (factory replacement)\u003c\/li\u003e\n  \u003cli\u003e1× material certificate for individual approval under §21\u003c\/li\u003e\n  \u003cli\u003e1× warranty card (3 years)\u003c\/li\u003e\n  \u003cli\u003ePackaging with edge protection\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eRoad-legality notes\u003c\/h2\u003e\n\u003cp\u003eAt present: individual approval under §21 StVZO (German law) at an inspection body is required. The enclosed material certificate is the basis for that inspection. As soon as the part type approval has been granted by the KBA (German federal motor transport authority) you can apply for it retrospectively.\u003c\/p\u003e","brand":"Max Carbon","offers":[{"title":"Without adaptive cruise control","offer_id":58107470840072,"sku":"D-T-177-DE","price":1199.0,"currency_code":"EUR","in_stock":true},{"title":"With adaptive cruise control","offer_id":58107470872840,"sku":"D-T-182-DE","price":1199.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/DT274-0_08cf2ba8-d4f6-499c-bf04-ff5de0704bff.jpg?v=1782670962"},{"product_id":"zaero-design-evo-s-frontgrill-nieren-passend-fur-bmw-m3-g80-g81-m4-g82-g83","title":"Zaero Design EVO-S Front grille Nieren suitable for BMW M3 G80 G81 \u0026 M4 G82 G83","description":"\u003ch1\u003eZaero Design EVO-S kidney grille suitable for BMW M3 G80 G81 \u0026amp; M4 G82 G83\u003c\/h1\u003e\n\u003cp\u003eThe EVO-S front grille from Zaero Design replaces the standard kidney grilles, suitable for the BMW M3 G80, M3 G81 Touring, M4 G82 and M4 G83 (S58, from 2021), and gives the front end a distinctive line. The grille is made in Germany from ABS plastic and delivered ready to fit in gloss black.\u003c\/p\u003e\n\u003ch2\u003eDirect replacement for the standard kidney grilles\u003c\/h2\u003e\n\u003cp\u003eThe grille picks up the contour of the front bumper precisely and replaces the original part without additional adjustments. All the components needed for fitting are included. The gloss black surface comes finished from production - no painting needed.\u003c\/p\u003e\n\u003ch2\u003eABS plastic in gloss black\u003c\/h2\u003e\n\u003cp\u003eABS is dimensionally stable, impact-resistant and UV-resistant - the grille stays suited to everyday use. As a pure replacement of the kidney grilles, the front grille does not require registration.\u003c\/p\u003e\n\u003ch2\u003eHighlights\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eReplaces the standard kidney grilles one for one\u003c\/li\u003e\n\u003cli\u003eABS plastic, ready to fit in gloss black\u003c\/li\u003e\n\u003cli\u003ePurely a visual replacement - no registration required\u003c\/li\u003e\n\u003cli\u003eFits the M3 Saloon, M3 Touring, M4 Coupé and M4 Convertible\u003c\/li\u003e\n\u003cli\u003eFitting also available at FLOW DOWN® in Essen\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOrdering with fitting at FLOW DOWN®\u003c\/h2\u003e\n\u003cp\u003eOn request we take care of the fitting in our own workshop in Essen - simply add the FLOW DOWN® body kit fitting service to your order. To match the front end: the magnetic number plate holder suitable for the BMW M3 G80 G81 \u0026amp; M4 G82 G83.\u003ca href=\"https:\/\/flow-down.com\/products\/bodykit-montage\"\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/flow-down.com\/products\/magnet-kennzeichenhalter-passend-fur-bmw-m3-g80-g81-m4-g82-g83\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eCompatible vehicles\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for BMW M3 G80 Saloon (S58, from 2021)\u003c\/li\u003e\n\u003cli\u003eSuitable for BMW M3 G81 Touring (S58, from 2022)\u003c\/li\u003e\n\u003cli\u003eSuitable for BMW M4 G82 Coupé (S58, from 2021)\u003c\/li\u003e\n\u003cli\u003eSuitable for BMW M4 G83 Convertible (S58, from 2021)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eScope of delivery\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eZaero Design EVO-S front grille (kidney grilles)\u003c\/li\u003e\n\u003cli\u003eFixing components\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eRoad-legality notes\u003c\/h2\u003e\n\u003cp\u003eAs a pure replacement of the kidney grilles, the front grille does not require registration in Germany. This is not an original BMW AG product; there is no commercial connection to BMW AG or BMW M GmbH.\u003c\/p\u003e","brand":"Zaero-Design","offers":[{"title":"Default Title","offer_id":58245264146696,"sku":"ZA-M3M4-FG","price":299.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/BMW-M3-M4-G8X-Front-Grill-1.png?v=1784215710"},{"product_id":"spiegelkappen-schwarz-glanz-passend-fur-bmw-3er-4er-m2-m3-m4","title":"ABS mirror caps suitable for BMW M2\/M3\/M4 (G80\/G81\/G82\/G87)","description":"\u003ch4 style=\"text-align: center;\" data-mce-fragment=\"1\"\u003eFull carbon mirror caps suitable for BMW M2\/M3\/M4 (G80\/G81\/G82\/G87)\u003c\/h4\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe carbon mirror caps add that certain something. Small as the detail is, carbon fibre mirror caps catch the eye immediately and give the car a character of its own.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eCarbon\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e-\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003ci data-mce-fragment=\"1\"\u003eexclusive, sporty and good-looking.\u003c\/i\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eThese are just some of the qualities associated with the material. In the automotive world in particular, it is highly regarded for its technical properties and its looks.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eAs these are complete replacement caps, an excellent fit is guaranteed. No improvising or bonding is needed.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe original mounting points ensure quick, professional fitting.\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch6 data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eScope of delivery:\u003c\/strong\u003e\u003c\/h6\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSet of mirror caps (2 pieces, left and right)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eno registration or approval required\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FLOW DOWN®","offers":[{"title":"Default Title","offer_id":58291225723144,"sku":null,"price":34.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0278\/4582\/0493\/files\/spiegelkappen-schwarz-glanz-bmw-m2-g87-m4-g82.png?v=1788547230"}],"url":"https:\/\/flow-down.com\/en\/collections\/exterior-tuning-parts-suitable-for-bmw-m3-touring-g81.oembed","provider":"FLOW DOWN®","version":"1.0","type":"link"}